SpectraLink Corporation | NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide |
Basic Operation
Making a call When the Start Call key is pressed from the standby mode, the first available idle line is activated. Enter the number and press the Dial softkey or the Start Call key to initiate the call.
Select a different line From the standby mode or after pressing Start Call press the LINE key plus the line number.
Answering a call When the handset rings, the line’s icon will flash and row 2 will display the line number and your dial number. Row 4 will display Fr (From) and the caller ID of the incoming call.
Press the Start Call key or the Answ softkey to answer the call.
When the call is answered an asterisk (*) displays at the start of row 4 which indicates that this line is in an active call with established audio connection.
Place call on hold Press the Hold softkey. When a call is placed on hold, an equal character (=) replaces the asterisk (*) and the Rsme softkey displays.
Mute the handset Press the Mute softkey. When the handset is muted, an x character replaces the asterisk (*). Press the Mute softkey again to restore audio pickup.
Place a second call on the same line
Only outgoing calls are permitted as the second call on a given line.
To access the second call dial tone, press LINE + [the line number]. Dial the number to place the second call. When a second call is active on the same line appearance, the second call appears below the first on the handset display. Use LINE + [the line number] to toggle between calls. The selected call is in bold type the other call is faded.
Call waiting When another call comes in on a different line, the called line icon flashes and a tone sounds in the audio stream.
To view the caller ID of the incoming call without interrupting the active call, press LINE + [the line number]. The display now shows information about the incoming call and you will continue hearing audio on the first call.
Answer a second call Press Answ or Start Call to answer the incoming call and place the active call on hold.
Redial When available, the left ReDl softkey may be pressed to redial the last number called.
Forward Calls may be forwarded on a
The LINE display will indicate if a line is forwarded by a > character followed by the destination address.
If any line is forwarded, the standby screen will display forwarding status. If the
If a given contact number has multiple appearances on the handset, forward the lowest line appearance to forward all calls to that number on any line appearance.
Part Number: | Page 47 |