INSTALLATION (CONT.)
Wall Mounting
1.If using a standard wall plate, this step is not necessary. Place the Desk/ Wall bracket on the wall and mark the location of the screws. Install the screws leaving 3/16" extending out from the wall. Use anchors to secure screws.
2.To connect the Desk/Wall bracket in the wall mount position, simply align the bracket with the slots on the base until it is securely in place.
A
3.Insert the AC adaptor(A) into the back of the unit.
4.Plug one end of the telephone line cord into the TEL LINE jack on the Base unit.
5.Thread the adaptor cord and telephone line cord through the grooves in the back of the unit. The cord will exit from the bottom.
DO NOT CONNECT THE AC ADAPTOR TO THE WALL POWER OUTLET YET.
6.Plug the other end of the line cord into the wall jack.
7.Mount the phone on the wallplate studs or on the screws as in step 1, and press until the unit locks in place.
8.Plug the AC adaptor into the power outlet.
14