Southwestern Bell GH3210 owner manual Caller ID Redial, To Store a Caller ID Number to Memory

CALLER ID OPERATION (CONT.)

Caller ID Redial

THE AREA CODE MUST BE PROGRAM- MED IN ORDER TO FULLY UTILIZE THE REDIAL FEATURE(SEE PAGE.18).

The GH3210 allows you to redial a phone number stored in the Caller ID memory.

1.Press the or button to select the Caller ID number that you want to dial.

2.Press and release the REDIAL button which activates the handset to dial the desired number

3.10 digits without a 1:

In some areas of the country,the area code must be included even when di- aling a local call. In this situation, set your GH3210 area code to another 3 digits not being used in the U.S. (i.e. 100...etc). Once your area code is programmed as above, your GH3210 will record all 10 digits for every in- coming call. Since the prefix 1 will be added automatically when dialing a 10 digit number, press the REDIAL button TWICE WITHIN 2 SECONDS for a local 10 digit call without a prefix 1.

4. 10 digits with a 1:

Since the prefix 1 will be added automatically when dialing a 10 digit number, simply press the REDIAL button ONCE to make your call.

To Store a Caller ID Number to Memory

1.Press or buttons to select number from Caller ID list.

2.Press MEM button. The LCD display will show “ENTER LOCATION?”

3.Enter memory location (0~9).

4 The LCD display will show “SAVE OK”.

Caller ID Erase

To Erase a Single Call

1.Press the or button to review the Caller ID records you received.

2.Press FLASH/DEL button to erase the call displayed. The display will show “ DELETE ITEM ?” on the bottom line.

	S
	C
VOL	R
	O	1-555-896-1234
	L
	L
		DELETE ITEM ?

3.Press FLASH/DEL button again; the Caller ID will be erased and the display will show the next message.

NOTE:

If the current message displayed is the last message, then the display will return to Stand-By mode.

To Erase All Calls

1.Press the or button to review the Caller ID records received, before eras- ing all calls.

2.While the display is showing any CID number, press and hold the FLASH/ DEL button for 2 seconds. The display will show “ DELETE ALL ?” on the bottom line.

25