Southwestern Bell GH3060 Radio Operation, Presetting Station, Listen to Preset Memory Stations

Page 13

Radio Operation

2.Press the FUNCTION button, the display will show "FM".

FM

MHZ

3.You can select "FM" or "AM" band by pressing the or button, then press the ENTER button to confirm.

AM

KHZ

4.Tune to the desired station by pressing the or button. Each time you press the button , the frequency will change by one step.

5.You can also use automatic tuning .

Keep the or button pressed until the frequency starts to change rapidly, then release the button and it will stop at the next strong station.

6.When listening to the radio, you can adjust the volume or to select a suitable listening level.

7.To turn off the radio, press the RADIO ON/OFF button.

AM

KHZ

Presetting Station

1.Press the RADIO ON/OFF button to turn on the radio.

2.Press the FUNCTION button. The display will show "FM".

3.You can select "FM" or "AM" band by pressing the or button, then press the ENTER button to confirm.

4.Press the or button to select a station which you want to save.

5.Press and hold the SET button about one second. "PROG" icon will flash on the LCD display.

 

PROG

FM

MHZ

6.While the PROG is blinking, press the

or button to choose a desired memory location. You can choose from CH1 to CH10 .

7.Press the ENTER button to confirm.

The station now broadcasting will be stored in the preset memory.

8.By repeating the above steps 3 to 7 ,

you can store other stations in the memory .

NOTE:

Up to 10AM and 10FM stations can be stored into preset memories.

Radio Operation

LISTEN TO PRESET MEMORY STATIONS

1.Press the RADIO ON/OFF button to turn on the radio.

2.Press the FUNCTION button to select "AM" "FM" , then press the ENTER button to confirm.

3.Press the SET button once, the latest location will be kept. You can select the desired memory by pressing or button.

4.To turn off the radio, simply press the RADIO ON/OFF button.

SLEEP FUNCTION

If you want the radio turned off after a desired playing time. You can follow the below steps.

1.During Radio play, or in the standby mode, press the SET button. The LCD will show "SLEEP 15".

2.Press or button repeatedly to select the desired playing time . The display

sequence is 15 minutes 30 minutes 60 minutes 90 minutes SLEEP OFF.

3.Press ENTER button to confirm, "sleep" icon will turn on.

NOTE:

During sleep mode, the wake up to buzzer/radio function still works .

23

24

Image 13
Contents Toll Free Helpline Important Safety Instructions Handset Battery Caution Safety Instructions for BatteriesHandset Battery Pack Contents Handset DiagramSouthwestern Bell Freedom Phone GH3060 Cordless Telephone Traits of Cordless Telephones Base DiagramRear View Installation To Set Area Code Caller ID Setup/Telephone OperationTo Set Language Receiving a Call Through the Handset Telephone OperationReceiving Call Through the Base To Program Frequently Called Numbers Memory FeaturesScratchpad Memory To Delete a Memory LocationWhen the Talk Button is on When the Talk Button Is OFFDo Not Press The Talk Button To Reset Unit Power failure protection/Battery BackupLCD Display Indications Alarm Operation Alarm Operation/Radio Operation Listen to Preset Memory Stations Presetting StationRadio Operation Sleep FunctionReceiving a Call Caller ID OperationReceiving Call Waiting Caller ID Reviewing CallsVIP Calls Caller ID EraseProblem Possible Cause Corrective Action Troubleshooting GuideTroubleshooting Guide For in Warranty Service ServiceFor OUT of Warranty Service Location NumberFCC Wants You to Know Limited Warranty