Sony CD145 manual Getting started, Connect the base Station

Page 14

3 Getting started

3.1Connect the base

station

Caution

Avoid placing the base station too close to large metal objects such as filing cabinets, radiators or electrical appliances.This can impair the range and sound quality. Buildings with thick internal and external walls may impair transmission of signals to and from the base.

Warning

Power is applied when the power adaptor is plugged into the unit and connected to the electricity socket.The only way to power down the unit is to unplug the power adaptor from the electricity socket.Therefore, ensure that the electricity socket is easily accessible.

The power adaptor and the telephone line cord have to be connected correctly, as incorrect connection could damage the unit.

Always use the telephone line cord supplied with the unit. Otherwise, you may not get a dial tone.

1Insert the plug of the power cord into the socket at the bottom of the base station.

2Insert the plug of the line cord into the socket at the bottom of the base station.

3Connect the other end of the line cord to the telephone line socket and the other end of the power cable to the electricity socket.

12

Getting started

Page 13 Page 15
Image 14
Page 13 Page 15
Contents
CD145 EN Digital Cordless TelephonePage Table of contents Answering machine How to change the remote PINDefault settings Frequently asked questions Power requirements Easily accessibleDisposal instructions for batteries National recovery & recycling systemUse one of the following disposal options Using GAP standard compliance Electric, Magnetic and Electromagnetic Fields EMFPage Line cord What’s in the boxTelephone handset Base station Batteries Talk key Overview Phone Handset ACall Log key Phonebook key Redial/Flash keyCall Transfer / Intercom / Conference Alphanumeric keypad GStar keyHHash key Program keyDisplay icons on the handset Event LED Forward key Delete key Base stationBackward key + / keyGetting started Connect the base StationConfigure your Phone Install rechargeable BatteriesSlide out the battery cover Place the batteries as Appear on the screen Country setting tablePress Tip Direct dialling Make a call PrediallingCall is initiated Call from the call LogDisplay shows the last number dialled Call from the phonebookCall from the redial list End a callHow to use Intercom How to make a second call During a callHow to answer a Second call RecallCalled handset rings if it is available How to make an Internal callPress on the called handset Conference call is initiatedExternal call is put on hold automatically How to find a handsetDuring the conference call Is shown on the display How to adjust earpiece volume During a callCall in progress Mute/Unmute microphone During a call Number is saved Selected memory locationHow to delete the entire phonebook How to access the phonebook Idle modeHow to edit the phonebook entry or Delete a number All the phonebook entries are deletedHow to access the redial list How to access the call logHow to delete the entire call log Settings How to set the time 1 PressHow to activate/deactivate Keypad lock How to set the ring VolumeHow to set How to select recall TimeHow to turn on/turn off the key Tone How to select dial ModeCurrent settings are displayed How to set the auto prefixHow to access your voice mail number How to change the master PINHow to program voice mailbox number New PIN is savedHow to restore to default settings Your phone is reset to its default settingsHow to record your outgoing message How to turn offHow to set answer delay How to select the default outgoing Message How to play Outgoing messageHow to delete outgoing message Country setting table on SectionHow to play Incoming messagesPress and hold for two Seconds to delete all old messages How to screen an incoming callHow to remotely access your Keys Description How to change the remote PINNew remote access PIN Is saved Default settings Items Default valuesCommunication is lost during a call Connection Handset does not switch onPhone does not work at all Poor audio qualityCall Waiting call cannot be answered AppearsSet-up Caller ID does not work properly Handset displays nothing, but only the is blinkingPhonebook entry cannot be stored Caller does not hear meNoise interference on your radio or television Handset is unable to registerUnable to perform remote operation
Top Page Image Contents