Sanyo CLT-A5832, CLT-A5822 instruction manual LCD Screen Messages, Error

LCD SCREEN MESSAGES

The following indicators show the status of a message or of the phone.

BLOCKED NUMBER/	The person is calling from a number that has been
NAME/CALLER	blocked from transmission.
TRANSFERRING..	A call transfer from one handset to another handset (For
	CLT-A5822 and CLT-A5832).
EMPTY	There is no record stored to the selected directory
	location.
ERROR	Caller information has been interrupted during transmis-
	sion or the phone is excessively noisy.
ENTER NAME	Prompt telling you to enter name in directory.
ENTER TEL NUMBR	Prompt to enter the telephone number for directory.
DELETE ALL?	Prompt asking you if you want to erase all Caller ID
	information.
DELETE?	Prompt asking you if you want to erase the current
	Caller ID entry or a directory entry that is shown on
	screen.
END OF LIST	Indicates that there is no additional information in Caller ID
	list.
HANDSET 1	This handset is handset 1 (For CLT-A5822 and CLT-A5832).
HANDSET 2	This handset is handset 2 (For CLT-A5822 and CLT-A5832).
PAGING	The PAGE key on the base has been pressed.
INCOMPLETE DATA	The telephone provider did not send all Caller ID informa-
	tion because the signal was weak or the call was
	interrupted.
MESSAGE WAITING	Caller has left a message (you must subscribe to voice
	mail service offered by your local phone company for
	this to work).
NEW CALL	Indicates call or calls have not been reviewed.
NO CALLS	There are no Caller ID records stored to memory.
NO DATA	No Caller ID information was received.
REPT	Repeat call.
UNKNOWN NUMBER/	The incoming call is from an area not serviced by Caller
NAME/CALLER	ID, or the information was not sent.
PAGING	Someone has pressed the PAGE key on the base.
RINGER=OFF	Ringer ON/OFF switch on the right side is set to OFF.

23

sy5822 10 april.p65 23 2006/5/12, ¤U¤È 02:52