Sanyo CLT-A5822, CLT-A5832 instruction manual Sound Signals, Troubleshooting, Caller ID

Page 24

SOUND SIGNALS

A long warbling tone	Signals an incoming call
Single Tone	A key is pressed
Three short beeps	Error tone
Two long beeps	Confirmation tone
One short beep and one long beep	Page signal
Three beeps every 2 seconds	Transfer signal
Two short beeps every 15 seconds	Low battery warning

TROUBLESHOOTING

CALLER ID

No display

•Is battery fully charged? Try replacing the battery.

•Make sure that the base is connected to a non-switched AC outlet. Disconnect the base from the plug and plug it in again.

•Did you order Caller ID service from your local telephone company? The display will not work unless you do this.

Caller ID error message

•The phone displays this message if it detects anything other than valid Caller ID information during the silent period after the first ring. This message indicates either the presence of noise on the line, or that an invalid message has been sent from the telephone company.

The Handset does not display the Caller ID information

•Check with your local telephone company to ensure that the Caller ID or Call Waiting Caller ID service is subscribed to and is functioning properly.

•If you answer the call before the first ring has been completed, the Caller ID information may have not been completely received by your phone.

•If you are using the additional handset(s) CLT-A5822 and CLT-A5832, try re- registering it to the main base as described in the manual.

Telephone Numbers are not being correctly dialed from the Caller ID memory

•Ensure that the number displayed is in the correct format and that if the area code and/or a "1" are included in the dialing process.

24

sy5822 10 april.p65

24

2006/5/12, ¤U¤È 02:52

Image 24

Contents CLT-A5830 Table of Contents Caller ID Features Main Features GHz Technology Other featuresIntroduction Checking package contents Getting StartedModular jack Battery setup Connecting the base unit and charging the handsetTone/pulse setting Telephone line connectionRegister handsets to the main base before use To register the second handset for CLT-A5822 and CLT-A5832Names and Controls HandsetBase Unit Charger For CLT-A5822 and CLT-A5832 Language setting Area code settingInitial Programming Ringer toneResetting to default BasicsReceiving a call Volume adjustment Ringer switchMaking a call Transferring a call For CLT-A5822 and CLT-A5832Pre-dialing up to 32 digits Changing the pre-dial numberRedialing Fast redialingLow battery warning Tone keyHandset locator Paging function Mute keyCaller ID Features Voice mail indicatorCaller ID with Call Waiting Caller ID list Reviewing Caller ID listFormatting Caller ID numbers Storing Caller ID entries in the directory Dialing a Caller ID numberDeleting entries from the Caller list Deleting the displayed entryDirectory Deleting all entriesStoring a number in the directory Reviewing and deleting directory contents Replacing a directory entry with a Caller ID entryChanging a stored number Making calls from the directoryChanging the Battery Battery replacement and handlingChain dialing from the directory Power Failure Recycling NICKEL-METAL Hydride BatteriesLight Signals Belt clip installationHeadset Jack and Belt Clip CHARGE/IN USE LED on the baseError LCD Screen MessagesSound Signals TroubleshootingCaller ID Telephone Troubleshooting Troubleshooting Maintenance Maximize Battery Performance Charge it for a full 12 hoursTechnical Information NoiseRange InterferenceTechnical Information Sanyo Comfort Warranty Warranty ApplicationWhat is not Covered Sanyo Canada INC.’S ResponsibilityWarranty Becomes Void HOW to Obtain Warranty ServiceOriginal Retail PURCHASER’S Responsibility Statutory WarrantiesGuaranteed Quality SOS Help LineNationwide Customer Support STAY-AT-HOME Convenience