TROUBLESHOOTING
If you hear 3 short beeps when you press TALK, you are out of range.
•Does the base need to be relocated?
•Charge battery.
•Make sure base is not plugged into an outlet with another household appliance.
Phone beeps
•Place handset in base for a minimum of 20 seconds to reset the security code. If that does not work, charge battery for 12 continuous hours.
•Clean charging contacts on handset and base with a soft cloth or an eraser.
•See solutions for No dial tone.
•Replace battery.
Dialing from Memory
•Did you program the directory keys correctly?
•Did you follow proper dialing sequence?
•Make sure the TONE/PULSE dialing mode is set to TONE or PULSE according to your phone service.
•Did you reprogram directory after a power outage or battery replacement?
Charge / In Use LED on base keeps flasing
•Provided your phone company offers voice mail indicator service and you subscribe to it, the CHARGE/IN USE LED flashes when the phone is in use to indicate there is a message waiting. It stops flashing after the message has been reviewed.
No dial tone/phone will not dial out
•Check that the AC power adapter is plugged into a working AC power outlet.
•Check all telephone cord connections or try another wall jack
•Do a basic reset of the phone: Disconnect the phone from the telephone line and remove the battery for 30 minutes and then
•Try other phones in the house to ensure it is not a line problem with the telephone company.
•Was the battery charged for at least 12 - 15 hours?
•Is the "LOW BATTERY INDICATOR" on?
26
sy5822 10 april.p65 | 26 | 2006/5/12, ¤U¤È 02:52 |