Sanyo CLT-A5832, CLT-A5822 instruction manual Telephone

Page 25

TROUBLESHOOTING

•When you press a button from the keypad, you should hear the confirmation "beep" from the handset. Try dialling more slowly and ensure you hear beep sounds. If not try pressing the same number again.

My handset(s) have static noise

•Try re-registering the handset to the main base unit as described in the manual.

TELEPHONE

No dial tone

Check installation:

-Is the base power cord connected to a working outlet?

-Is the telephone line cord connected to the base unit and the wall jack?

•Disconnect the base from the wall jack and connect another phone to the same jack. If there is no dial tone in the second phone, the problem might be your wiring or local service.

•Is the handset out of range of the base?

•Make sure the battery is properly charged (12 continuous hours).

•Is the battery pack installed correctly?

•Did the handset beep when you pressed TALK? Did the CHARGE/IN USE indicator come on? The battery may need to be charged.

Dial tone is OK, but cannot dial out

•Make sure the TONE/PULSE dialing mode is set to TONE or PULSE according to your phone service.

Handset does not ring

•Make sure the RINGER switch on the handset is turned to ON.

•You may have too many extension phones on your line. Try unplugging some phones.

•See solutions for No dial tone.

You experience static, noise, or fading in and out

•Change channels.

•Is handset out of range? Move closer to the base.

25

sy5822 10 april.p65

25

2006/5/12, ¤U¤È 02:52

Image 25

Contents CLT-A5830 Table of Contents Caller ID Features Other features Main Features GHz TechnologyIntroduction Getting Started Checking package contentsModular jack Connecting the base unit and charging the handset Battery setupTelephone line connection Tone/pulse settingRegister handsets to the main base before use To register the second handset for CLT-A5822 and CLT-A5832Handset Names and ControlsBase Unit Charger For CLT-A5822 and CLT-A5832 Area code setting Language settingInitial Programming Ringer toneBasics Resetting to defaultReceiving a call Ringer switch Volume adjustmentMaking a call Transferring a call For CLT-A5822 and CLT-A5832Changing the pre-dial number Pre-dialing up to 32 digitsRedialing Fast redialingTone key Low battery warningHandset locator Paging function Mute keyVoice mail indicator Caller ID FeaturesCaller ID with Call Waiting Reviewing Caller ID list Caller ID listFormatting Caller ID numbers Dialing a Caller ID number Storing Caller ID entries in the directoryDeleting entries from the Caller list Deleting the displayed entryDeleting all entries DirectoryStoring a number in the directory Replacing a directory entry with a Caller ID entry Reviewing and deleting directory contentsChanging a stored number Making calls from the directoryBattery replacement and handling Changing the BatteryChain dialing from the directory Recycling NICKEL-METAL Hydride Batteries Power FailureBelt clip installation Light SignalsHeadset Jack and Belt Clip CHARGE/IN USE LED on the baseLCD Screen Messages ErrorTroubleshooting Sound SignalsCaller ID Telephone Troubleshooting Troubleshooting Maintenance Charge it for a full 12 hours Maximize Battery PerformanceNoise Technical InformationRange InterferenceTechnical Information Warranty Application Sanyo Comfort WarrantyWhat is not Covered Sanyo Canada INC.’S ResponsibilityHOW to Obtain Warranty Service Warranty Becomes VoidOriginal Retail PURCHASER’S Responsibility Statutory WarrantiesSOS Help Line Guaranteed QualityNationwide Customer Support STAY-AT-HOME Convenience