5. Press ENTER to store the new name.
• To register a city name for the Home clock, first display
the Home clock then 2nd 
EDIT followed by 
to move the cursor to the city name line.
•Only one changed city name can be stored in each of the Home and World clocks.
•Each changed name is stored until you change the zone number next time.
4. Setting Daylight Saving Time/Summer Time
If DST (daylight saving time/summer time) is used, the local time is advanced one hour during the summer.
•DST can be set independently in either the Home or the World clock. For example, if DST is set for the Home clock, it does not have to be set for the World clock.
(1) Home clock
1. Press CLOCK once or twice to display the Home clock.
2. Press 2nd 
EDIT to enter the edit mode.
3. Enter the correct daylight saving time/summer time.
4. Press 2nd 
ENTER to set the time as DST.
A “ 
” appears on the display and DST is now set.
(2) World clock
1.Press CLOCK once or twice to display the World clock.
2.Press 2nd 
EDIT , then 2nd 
ENTER .
Setting DST in the World clock automatically sets the time one hour ahead.
•When DST is set for one World city, it is used for all cities displayed in the World clock.
(3) Clearing DST
To clear DST, follow the steps 1 to 4 for Home clock, or follow the steps 1 and 2 for World clock.
A “
” disappears.
Note For Storing the Listings
If the memory is full, “MEMORY FULL” will be displayed briefly and the listing cannot be stored. Delete unnecessary data and free up memory to make enough space to store new listings. (Refer to pages 26, 28.)
8