Using the Option Function
You can share the specific data, the data in the specific mode, or the whole data (for the purpose of making a backup copy or restoring the data) by transferring it to/from another
•Backup data transfer is only possible between identical models.
•Communicating with another
1. Cautions and Special Notes for Data Transfer
•Turn off the secret function before transferring data by mode. If the secret function is turned on, data cannot be transferred by mode.
•After data transfer, the data on the transfering Organizer is preserved.
•Alarm setting is ignored. The alarm will not sound during data transfer.
•The Auto power off function is disabled in all the transfer modes.
•The Backlight is nullified during data transfer. (When the Backlight is turned on, it is automatically turned off at the beginning of data transfer.)
•When the Organizers are not in the same mode before transferring data by entry or mode, “DATA ERROR !” is displayed and no data transfer is allowed.
However, directories in the TEL (or
•When the communication cable is disconnected during data transfer, “I/O DEVICE ERROR !” is displayed. Press C•CE to clear the error, check that the Organizers are connected correctly, and then start the steps again.
•The indication “Replace the OPERATING batteries !” shown when 2nd OPTION are pressed means that the operating batteries are almost exhausted. Replace them with new ones then try again to transfer data.
•When “MEMORY FULL” is displayed and data transfer is aborted, delete unnecessary data on the receiving Organizer, then start the steps from the beginning.
29