Selecting a Personalized Ring
SELECT RING
The Select Ring feature allows you to choose your own personalized ringing pattern for your telephone from among eight different patterns.
To select a personalized ringing pattern
1. With the headset off, press Conf (or | ). |
Current ringing pattern plays and repeats every three seconds.
2. Continue to press (and then release) Conf (or | ) to cycle |
through all eight ringing patterns. |
|
3. If you want to save the ringing pattern currently being played, do not
press Conf (or 
) anymore. You will hear the selected ringing pattern two more times, and then it will be automatically saved.
You will hear a confirmation tone (two rising tones), and your new ringing pattern is set.
Note: If you turn on the headset, receive a call, or lose power during selection, the process is canceled and you must start again.
Voice and Display Features
For directions on using the voice features on your telephone such as Abbreviated Dialing, Call Forwarding, and Send All Calls, see the section titled Basic Voice Terminal Procedures in either of two user’s guides:
•DEFINITY® Enterprise Communications Server Generic 1, Generic 3, and System 75 Automatic Call Distribution (ACD) Agent Instructions,
•DEFINITY® Enterprise Communications Server Generic 1, Generic 3, and System 75 Automatic Call Distribution (ACD) Supervisor Instructions,
You can order both of these books from the Lucent Technologies BCS Publications Center by calling 1 800
8