Using the Softkey Feature Menus
There are three separate softkey feature menus. Each of these menus allows you to select from four different features.
You can enter Softkey Mode (and view the softkey feature menu) by pressing
the display control button labeled Menu or 
. The following is an example of a softkey feature menu.
Dir Drop HFAns Timer
The top line of each softkey feature menu screen shows you the status of each of the four features. An arrow appears above the feature name or abbreviation if that feature is active. In the above example, the arrow above the Timer feature indicates that feature is active.
The second line on each softkey feature menu shows the features you can access. To use any of these features, you must press the softkey below the feature name or abbreviation.
Press the Next or Prev button until the feature you want to use appears on the display.
Note: An error tone (one beep) sounds when you have made an inappropriate softkey entry.
Press the Exit button at any time to exit the softkey feature menus and return to normal
Other Softkey Features That May Be On Your Display
There are 12 default features that can be accessed with the softkeys on a CALLMASTER V telephone. However, the system manager may substitute other softkey features in their place.
Call-Handling Features
HEADSET ON/OFF
The system administrator should have administered a your CALLMASTER V telephone.
To turn on your headset
1.Press Headset On/Off .
Headset On/Off
button on
The green light next to the button goes on to remind you the headset is active.
To turn off your headset
1. Press
Headset On/Off
again.
The green light next to the button goes off.
4