Avaya 3626 Wireless Telephone, Desktop Charger and Gang Charger with CCMS
Utilize System Features
Transfer a call While active on the call, press the FCN key and the 4 key.
The call is placed on hold, the line number for the call on hold flashes, and you hear dial tone.
Dial the telephone number to which you want to transfer the call.
Do one of the following:
•To transfer the call without announcing it, press the FCN key and the 4 key, and then press the Power Off / End Call key to hang up.
The call is transferred. The display shows “Transfer Complete”.
•To announce the call before transferring it, wait for the called party to answer. When the called party answers, announce the call, press the FCN key and the 4 key, and then press the Power Off / End Call key to hang up.
The call is transferred. The display shows “Transfer Complete”.
Conference a call 1. While active on the call, press the FCN key and the 5 key.
2.The call is placed on hold, the line number for the call on hold flashes, and you hear dial tone.
3.Dial the telephone number of the person you want to add to the call.
Wait for the person to answer.
4.To add the person to the call, press the FCN key and the 5 key. The display will show “Conference X” or “X – party conference in progress” (where X equals number of parties on the conference, minus 1), depending on the switch administration.
Repeat Steps 1 through 4 to add other calls to the conference.
Mute/unmute a call To mute a call, press the FCN key and the 1 key. The call is muted. The display shows “<Muted>”.
To unmute a call, press the FCN key and the 1 key again.
| Page 11 |
Issue 1 |
|