Avaya 3626 Wireless Telephone, Desktop Charger, and Gang Charger with CCMS
3. 3626 Desktop Charger
The Avaya 3626 Desktop Charger is designed to charge the Nickel Metal Hydride (NiMH) Battery Packs. Full charging is accomplished in approximately one and a half hours. Chargers operate in a 50° to 85° F (10° to 30° C) environment. Do not expose them to freezing temperatures or direct sunlight.
The Desktop Charger is shipped with the appropriate power supply for the site’s location. Place the Desktop Charger on a flat, horizontal surface. Plug the power supply into the Desktop Charger and into an appropriate wall outlet.
Caution
Do not place anything in the Desktop Charger other than the Wireless Telephone. You might damage the contacts. Bent contacts can keep the Wireless Telephone from charging.
Using the Desktop Charger
Indicator light
Charging indicator
Charge Complete
The user must end any call in progress by pressing the Power Off/End Call button on the Wireless Telephone before placing the handset into the Desktop Charger. The Wireless Telephone may be off or in standby mode during charging.
Place the Avaya 3626 Wireless Telephone into the Desktop Charger slot facing forward. If the Wireless Telephone is placed correctly, the red indicator light will come on. The indicator light will not come on when the slot is empty, when the Avaya 3626 Wireless Telephone is improperly seated, or when the Desktop Charger has no power applied.
If the Wireless Telephone is in standby mode, it will display its extension number and Charging. . .. If the Wireless Telephone is turned off, only Charging. . . will display. The dots will be racing during the charging cycle. It is normal for the Battery Pack to become warm when charging.
When the Wireless Telephone is fully charged, Charge Complete will display. The indicator light will remain on until the Wireless Telephone is removed.
| Page 19 |
Issue 2 |
|