Avaya Desktop Charger, 3626 manual Using the Gang Charger

Page 20

Avaya 3626 Wireless Telephone, Desktop Charger and Gang Charger with CCMS

4. The Gang Charger

 

The Avaya Gang Charger is designed to charge

 

four Nickel Metal Hydride (NiMH) Battery Packs

 

simultaneously. Full charging is accomplished in

 

approximately one and a half hours. Chargers

 

operate in a 50° to 85° F (10° to 30° C)

 

environment. Do not expose them to freezing

(shown with two empty charging bays)

temperatures or direct sunlight.

 

The Gang Charger is shipped with the appropriate power

 

supply for the site’s location. Place the Gang Charger on a

 

flat, horizontal surface. Plug the power supply into the

 

Gang Charger and into an appropriate wall outlet.

Caution

Do not place anything in the Desktop Charger other than the Wireless Telephone. You might damage the contacts. Bent contacts can keep the Battery Pack from charging.

Using the Gang Charger

 

Remove the Battery Pack from the Avaya 3626 Wireless

 

Telephone by depressing both battery release buttons. The

 

Battery Pack will release.

 

Insert the Battery Pack into one of the four charging bays

 

so that the Battery Pack contacts meet the charging bay

 

contacts. The LED above the charging bay will turn on to

 

indicate that charging is in progress. Complete charging

 

occurs in one and a half to two hours. The Battery Pack is

 

partially charged in five minutes.

 

When charging is complete, the LED will turn off. Lift the

 

Battery Pack out of the charging bay.

Blinking LED

If the LED starts blinking as soon as the Battery Pack is

 

inserted, the Battery Pack may be improperly seated. Lift it

 

out and reinsert. If the LED continues to blink or starts

 

blinking at any time during the charging process, it

 

indicates that there is a problem with the Battery Pack that

 

makes it unusable. Do not continue to charge the Battery

 

Pack. Dispose of it properly and do not attempt to use it in

 

the Wireless Telephone. Do not attempt to open or repair a

 

defective Battery Pack. Contact your service representative

 

for assistance.

Page 20

555-301-710

 

Issue 1

Image 20
Contents With Ccms 555-301-710 555-301-710 Issue Specific Absorption Rate SAR Information Operational Warnings Table of Contents About This Document Contacting Avaya Icons and ConventionsAvaya 3626 Wireless Telephone Overview Turn the Wireless Telephone On Turn the Wireless Telephone OffMake a Call Answer a CallAdjust Speaker Volume Utilize System Features =LND Selecting a channel See Setting User Preferences below Push to Talk PTTPush to Talk PTT Push to Talk PTT Status Indicators Wireless Telephone HeadsetSetting User Preferences User Option Menu ActionBattery Packs Indications of LowUsing the Desktop Charger Desktop ChargerUsing the Gang Charger Gang ChargerCleaning the Chargers General Care InstructionsGeneral Care of the Wireless Telephone and Chargers 555-301-710 Issue Tips For Use