Avaya 3626 Wireless Telephone, Desktop Charger, and Gang Charger with CCMS
Setting User Preferences
When the Wireless Telephone is in standby mode (on but not in use), press and briefly hold FCN to display user options. Check with your system administrator for specific features supported by your Wireless Telephone.
►(Right arrow) displays next menu item.
◄(Left arrow) displays previous menu item. 0 (Zero) selects or changes item.
FCN returns to previous menu level.
Power Off/End Call | exits menus |
|
User Option Menu |
| Action: |
Ring Type | Select Telephone Ring to set the | Press 0 to select |
| standard ring on the Wireless | desired ring type. The |
| Telephone. | ring type currently set |
| Normal: is the factory default ring. | displays with an |
| Vib/norm ring: vibrates for 5 | asterisk. |
| seconds and then rings. |
|
| Vibrator ring: vibrates for a non- |
|
| audible call alert. |
|
High Noise Mode Adjusts the Wireless Telephone to account for background noise. Normal: for most office environments
High: for moderate background noise
Severe: for extremely noisy conditions.
Current IP address In IP systems, the IP address of the Wireless Telephone is displayed. This number may not be edited.
Select an option that describes the noise in your environment.
None
Extension | This number is used to identify the | Use keypad to enter |
| Wireless Telephone and is for | extension number |
| display purposes only. |
|
Push to talk | Channel selection | Enter number to |
| select channel. | |
|
| |
| monitoring. |
|
| Enable turns on PTT mode. | Select Enable or |
| Disable turns off PTT mode. | Disable |
(Additional options may be present. Contact your system administrator for information.)
| Page 17 |
Issue 2 |
|