Avaya 3626 Wireless Telephone, Desktop Charger, and Gang Charger with CCMS
2.1Using the Avaya 3626 Wireless Telephone
Turn the Wireless Telephone On
Press and hold the Power On / Start Call key for about one second. Two chirps will sound. When the key is released, the
Turn the Wireless Telephone Off
While in standby mode press and hold the Power Off / End Call key. One chirp will sound and the Wireless Telephone will turn off. The Wireless Telephone cannot be turned off during a call. End the call first and then turn the Wireless Telephone off.
Make a Call
Go Off Hook Press the Power On / Start Call key.
Dial Number Dial calls with the Wireless Telephone exactly as with your desk phone. You may dial extension numbers, internal numbers, or make external calls, depending on the setup of your PBX. You may hear a dial tone, then press the number keys to dial the number.
Place a Second Call Press FCN + 3 to place the active call on hold. Press the LINE key and the number key of the line you wish to use. Dial the number.
Answer A Call
The Wireless Telephone will ring or vibrate to alert you to an incoming call. Additionally, a line number on the display may flash, and the display may show information about the call, such as caller’s name and extension.
To answer a call, press the Power On / Start Call key, hold the earpiece to your ear and speak with a normal tone of voice.
If you are on a call and hear subdued ringing, a call is coming in on a second line. The line number on the display may be flashing. To answer this call, put your first call on hold and press the LINE key then the line number of the second call.
NOTE: IP Office will support line appearance functionality in a future release.
| Page 9 |
Issue 2 |
|