Samsung SPH-M560 manual Voice Service, Call Name or #

Voice Service

Voice recognition allows you to say commands to perform common functions supported by your phone.

To activate voice recognition:

1.Press and hold . (The phone prompts you to say a voice command.)

2.Say one of the following commands:

• Call <Name or #>	• Lookup <Name>
• Send Text <Name or #>	• Go To <Menu>
• Send Picture <Name or #>	• Check <Item>

•More Options (displays other 3 commands)

Call <Name or #>

You can dial any valid 7, 10 or 11 digit North American phone number. You can also dial by pronouncing a name stored in your Contacts.

Tips for using Call <Name or #>:

•Voice Service works best in quieter environments.

•When saying a number, speak at a normal speed and say each digit clearly. There is no need to pause between digits.

•The phone recognizes the digits one, two, three, four, five, six, seven, eight, nine, zero, and oh. The phone does not recognize numbers such as "one eight hundred" for "1-800." Instead, say "one-eight-zero-zero."

•The phone recognizes only valid 7, 10 or 11 digit North American phone numbers.

•If your phone does not usually recognize you correctly when you are using Voice Service, try adapting Voice Service to your voice, which can significantly improve accuracy for some speakers.

To place a call using Call <Name or #>:

1.Activate voice recognition. (See page 26.)

2.Say “Call” followed by either a name stored in your Contacts or a valid 7, 10 or 11 digit North American phone number naturally and clearly.

•If the phone asks you, “Did You Say,” followed by the correct number, say Yes. (You can also select the correct number from those

26 Voice Service