Attaching the Belt Clip
Align the grooves on the clip with those on the battery and press downward until you hear a click.
Use | To remove the clip, press the | |
belt clip tab away from the | ||
| ||
for | battery using a key. Then | |
slide the clip upward and | ||
| ||
Preparing Your Radio | away from the radio. | |
|
4
Attaching the Universal Connector Cover (Dust Cover)
The universal connector is located on the antenna side of the radio. It is used to connect MOTOTRBO accessories to the radio.
| Insert the hooked end of the |
| cover into the slots above the |
| universal connector. Press |
| downward on the cover to |
Universal | seat the lower tab properly |
Connector | into the RF connector. |
| Turn the thumbscrew |
| clockwise to secure the |
| connector cover to the radio. |
To remove the universal connector cover, press down
on the cover and turn the thumbscrew counterclockwise.
Replace the dust cover when the universal connector is not in use.
English