Powering Up the Radio
Rotate the On/Off/Volume Control Knob clockwise until you hear a click. The LED lights up solid green.
A brief tone sounds, indicating that the power up test is successful.
NOTE: There is no power up tone if the radio tones/alerts function is disabled (see
Turning Radio
Tones/Alerts On or
Off on page 37).
If your radio does not power up, check your battery. Make sure that it is charged and properly attached. If your radio still does not power up, contact your dealer.
To turn off the radio, rotate this knob counterclockwise until you hear a click.
Adjusting the Volume
To increase the volume, turn the On/Off/Volume Control Knob | PreparingYourRadiofor | |
clockwise. | ||
| ||
To decrease the volume, turn this knob counterclockwise. | Use | |
|
NOTE: Your radio can be programmed to have a minimum volume offset where the volume level cannot be turned past the programmed minimum volume. Check with your dealer or system administrator for more information.
5
English