Advanced Features
32
Multi-Site Controls
These features are applicable when your current radio channel is part of an IP Site Connect or Linked Capacity Plus configuration.
NOTE: See IP Site Connect on page 10 and Linked Capacity Plus on page 11 for more details about these configurations.
Starting an Automatic Site Search
NOTE: The radio only scans for a new site if the current signal is weak or when the radio is unable to detect any signal from the current site. If the RSSI value is strong, the radio remains on the current site.
Procedure:
1Press the programmed Site Lock On/Off button.
2A tone sounds.
3The LED blinks yellow rapidly when the radio is actively searching for a new site, and turns off once the radio locks on to a site.
The radio also performs an automatic site search (site is unlocked) during a PTT button press or data transmission if the current channel,
Stopping an Automatic Site Search
When the radio is actively searching for a new site:
Procedure:
1Press the programmed Site Lock On/Off button.
2A tone sounds and the LED turns off.
Starting a Manual Site Search
Procedure:
1Press the programmed Manual Site Roam button.
2A tone sounds and the LED blinks green.
3You hear a positive indicator tone and the LED turns off, indicating the radio is locked on to a site.
OR
You hear a negative indicator tone and the LED turns off, indicating the radio is unable to lock on to a site.
English