Linked Capacity Plus
Linked Capacity Plus is a
Linked Capacity Plus allows your radio to extend trunking communication beyond the reach of a single site, by connecting to different available sites which are connected via an Internet Protocol (IP) network. It also provides an increase in capacity by efficiently utilizing the combined available number of programmed channels supported by each of the available sites.
When the radio moves out of range from one site and into the range of another, it connects to the new site's repeater to send or receive calls/data transmissions. Depending on your settings, this is done automatically or manually.
If the radio is set to do this automatically, it scans through all available sites when the signal from the current site is weak or when the radio is unable to detect any signal from the current site. It then locks on to the repeater with the strongest Received Signal Strength Indicator (RSSI) value.
In a manual site search, the radio searches for the next site in the roam list that is currently in range (but which may not have the strongest signal) and locks on to it.
Any channel with Linked Capacity Plus enabled can be added to a particular roam list. The radio searches these channels during the automatic roam operation to locate the best site.
NOTE: You cannot manually add or delete an entry to the |
| |
roam list. Check with your dealer or system |
| |
administrator for more information. | Identifying | |
Similar to Capacity Plus, icons of features not applicable to | ||
| ||
Linked Capacity Plus are not available in the menu. You hear a |
| |
negative indicator tone if you try to access a feature not |
| |
applicable to Linked Capacity Plus via a programmable button |
| |
press. |
| |
Check with your dealer or system administrator for more | RadioControls | |
information on this configuration. | ||
|
11
English