Motorola XPR 7350 manual Advanced Features

Page 39

allowing you to communicate with the group of radios without pressing the PTT button.

This activated microphone state is also known as “hot mic”.

If your radio has Emergency Cycle Mode enabled, repetitions of hot mic and receiving period are made for a programmed duration.

NOTE: During Emergency Cycle Mode, received calls sound through the radio’s speaker.

If you press the PTT button during the programmed receiving period, you will hear a prohibit tone, indicating that you should release the PTT button. The radio ignores the PTT press and remains in Emergency mode.

NOTE: If you press the PTT button during hot mic, and continue to press it after the hot mic duration expires, the radio continues to transmit until you release the PTT button.

Procedure:

1Press the programmed Emergency On button.

2The LED lights up solid green.

3Once a tone sounds, speak clearly into the microphone. When hot mic has been enabled, the radio automatically transmits without a PTT press until the hot mic duration expires.

While transmitting, the LED lights up solid green.

4The radio automatically stops transmitting when:

Once the cycling duration between hot mic and receiving calls expires, if Emergency Cycle Mode is enabled.

OR

Once the hot mic duration expires, if Emergency Cycle Mode is disabled.

5To transmit again, press the PTT button.

OR

Press the programmed Emergency Off button to exit the Emergency mode.

6Press Emergency Off button to exit the Emergency mode.

If your radio is set to Silent, it does not display any audio or visual indicators during Emergency mode, or allow any received calls to sound through the radio’s speaker, until the programmed hot mic transmission period is over, and you press the PTT button.

If your radio is set to Silent with Voice, it does not display any audio or visual indicators during Emergency mode when you are making the call with hot mic, but allow sound through the radio’s speaker when the target radio responds after the programmed hot mic transmission period is over. The indicators only appear when you press the PTT button.

NOTE: If the Emergency Alarm request fails, the radio does not retry to send the request, and enters the hot mic state directly.

Advanced Features

29

English

Image 39
Contents User Guide Page Declaration of Conformity Declaration of ConformityDeclaration of Conformity Iii ContentsEmergency Operation Contents Satisfy FCC RF energy exposure requirements Important Safety InformationSoftware Version This radio is restricted to occupational use only toComputer Software Copyrights ViiViii Handling PrecautionsHow to Use This Guide What Your Dealer/System Administrator Can Tell YouGetting Started Preparing Your Radio for Use Charging the BatteryAttaching the Antenna Attaching the BatteryAttaching the Belt Clip Attaching the Universal Connector Cover Dust CoverAdjusting the Volume Powering Up the RadioRadio Controls Identifying Radio Controls Assignable Radio Functions Programmable ButtonsPush-To-Talk PTT Button  Assignable Settings or Utility FunctionsSwitching Between Conventional Analog and Digital Mode Capacity Plus IP Site ConnectLinked Capacity Plus LED Indicator Identifying Status IndicatorsAudio Tones Indicator TonesReceiving and Making Calls Selecting a ZoneSelecting a Channel  Receiving and Responding to a Group Call Receiving and Responding to a Radio Call Receiving and Responding to a Private Call  Receiving an All Call  Receiving and Responding to a Selective Call Making a Call with the Channel Selector Knob Making a Radio Call Making a Private Call  Making an All Call Talkaround Stopping a Radio Call Permanent Monitor  Monitoring a ChannelScan Lists Advanced FeaturesScan  Starting and Stopping Scan Responding to a Transmission During a Scan  Restoring a Nuisance Channel Vote ScanCall Alert Operation Call Indicator Settings Escalating Alarm Tone Volume  Making a Call Alert with the One Touch Access ButtonEmergency Operation  Sending an Emergency Alarm Sending an Emergency Alarm with Voice to Follow  Sending an Emergency Alarm with CallAdvanced Features  Sending a Quick Text Message Text Messaging Features Reinitiating an Emergency Mode  Exiting an Emergency ModePrivacy  Starting a Manual Site Search Multi-Site Controls Starting an Automatic Site Search  Stopping an Automatic Site SearchPassword Lock Features  Accessing the Radio from PasswordLone Worker  Unlocking the Radio from Locked State Bluetooth Finding and Connecting to a Bluetooth Device  Disconnecting from a Bluetooth Device Switching Audio Route Utilities  Setting the Squelch Level Setting the Power Level  Turning the Option Board Features On or Off Checking the Battery Strength  Turning Radio Tones/Alerts On or Off Voice Announcement  GPS  Intelligent AudioCarry Devices AccessoriesAntennas BatteriesHeadsets and Headset Accessories ChargersEarbuds and Earpieces Remote Speaker Microphones Surveillance AccessoriesMiscellaneous Accessories Batteries and Chargers Warranty Workmanship WarrantyCapacity Warranty Limited Warranty Limited WarrantyWarranty VII. Governing LAW Page 68009500001