VTech cs5121 Review the call log, Make call log entries ready to dial

• If you have

programmed a

home area code

(page 10), only

the last seven

digits of the

Telephone operation

Review the call log

1.Press /VOL-/CIDto view the call log when in idle mode.

2.Press or to scroll through the entries.

There will be an error tone when you reach the end of the call log list and the screen will display END OF LIST.

incoming phone

numbers from

that area code

will be displayed

whle revewng

the call log. Press

# repeatedly to

display all possible

dialing options.

Make call log entries ready to dial

Although the call log entries received have 10 digits (the area code plus the seven-digit number), in some areas, you may need to dial only the seven digits, or a 1 plus the seven digits, or a 1 plus the area code plus the seven digits. You can change the number of digits that you dial from or store in the call log.

While reviewing the call log, press # repeatedly to display different dialing options for local and long distance numbers before dialing or saving the telephone number in the directory. See the example on the right.

You may also press 1 repeatedly to add or remove a 1 in front of the telephone number before dialing or saving it in the directory. See the examples on the right.

When the number displayed is in the correct format for dialing, press /FLASH to call the number.

800-595-9511

1-800-595-9511

595-9511

1-595-9511

800-595-9511

1-800-595-9511

595-9511

1-595-9511

26 www.vtechphones.com