VTech cs5121 important safety instructions Charge light is off in this section

Page 51

Troubleshooting

Problem

Suggestion

 

 

 

The battery does not

Make sure the handset is placed in the telephone base correctly. The handset CHARGE light

charge in the handset

 

should be on.

or the handset battery

Remove the battery from the handset and then re-install it in the handset. Put the handset

does not accept

 

back to the telephone base and charge for 16 hours.

If the handset is in the telephone base but the handset CHARGE light is not on, see The

charge.

 

 

charge light is off in this section.

 

• It may be necessary to purchase a new battery. Please see the Battery section of this user’s

 

 

manual (page 45).

 

• The telephone might be malfunctioning. Please see the Warranty section of this user’s manual

 

 

(page 58) for further instruction.

 

 

 

The CHARGE light is

Clean the charging contacts on the handset(s) and telephone base each month using a pencil

off.

 

eraser or a dry non-abrasive fabric.

 

Make sure the power adapter and telephone line cords are plugged in correctly and

 

 

securely.

 

Unplug the power adapter. Wait for 15 seconds before plugging it back in. Allow up to one

 

 

minute for the handset and telephone base to reset.

 

• The telephone might be malfunctioning. Please see the Warranty section of this user’s manual

 

 

(page 58) for further instruction.

 

 

 

48

www.vtechphones.com

Image 51
Contents Congratulations Important safety instructionsTable of contents Appendix Getting started Parts checklistTelephone base installation Battery installation and charging Wall mounting bracket installation Mounting bracket installationDesktop/tabletop bracket installation VOL-/CID Handset layoutDelete Telephone base layoutDate and time Telephone settingsRinger Ringer volume handsetHome area code Dial modeLanguage Telephone operation Temporary tone dialing Call waitingFind handset RedialStore a directory entry DirectoryReview the directory Character chartEdit a directory entry Delete a directory entry Dial a number from the directory Copy a directory entry into speed dialStore a speed dial entry Speed dialEdit a speed dial entry Dial a speed dial number Delete a speed dial entryReassign speed dial locations About caller ID Call log Make call log entries ready to dial Review the call logDial a call log number Entries ready to dial section on Save a call log entry to the directoryDelete an entry Delete from the call logDisplays When Call log display screen messagesMessage capacity Answering systemSet the clock Activate the answering systemSet number of rings Answering system setupSet telephone base ringer Set remote access codeSet message alert tone Play your announcement Outgoing announcementDelete your announcement Record your own announcementNew message indication Message playbackOptions during playback Memo playback Delete all messagesRecord and play memos Record a memoCall intercept Call screeningWindow displays When Message window displaysCommand Function Remote accessHandset display screen messages Handset ringer is turned off Battery Important safety instructions Problem Suggestion TroubleshootingCharge light is off in this section Connecting To take place Your area. See Dial mode on page 10 to set the dial type Telephone company charges may apply Remove and re-insert the battery Dial or store from the call log Troubleshooting Troubleshooting Operating range MaintenanceAbout cordless telephones WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsRbrc seal Technical specifications Index Temporary tone dialing  91-001378-050-100 User’s manual