VTech ia5829 manual Basic Operation Telephone Memory, Edit a Number/Name Stored in Memory

Basic Operation

Telephone Memory

6.When you finish entering the name, press SELECT or PROG. The screen displays

ENTER NUMBER.

7.	Enter the telephone number. Use to backspace and make corrections.
	Press REDIAL/PAUSE to store a pause in the dialing sequence.
	-OR-
	Press REDIAL/PAUSE to display the last number dialed from this phone.
8.	Press SELECT or PROG to store your entry. The screen displays DISTINCT
	RING? and the current setting.
9.	Press or to change the setting. Choose Y (for yes) if you wish the phone
	to alert you to calls from this number by changing to a distinctive ringing
	pattern after the first ring. Choose N for a normal ringing pattern.

10.Press SELECT or PROG to confirm your selection. If you chose Y, a D will be displayed with the memory entry.

Edit a Number/Name Stored in Memory

1.Press and hold the memory location key (1 through 9) of the entry you wish to edit.

2.When the screen displays the entry you want to edit, press SELECT. Then pressoruntil EDIT flashes.

SPEED EDIT ERASE 8005959511

01

3.Press SELECT. The screen displays the name and number. The cursor

appears at the end of the name. Use , and the dial pad keys to edit the name. Press SELECT to move on to edit the number. Use to backspace and make corrections. Press SELECT to move to edit the distinctive ring setting.

4.Press SELECT to save the edited information

Delete a Number/Name Stored in Memory

1.Press and hold the memory location key (1 through 9) of the entry you wish to delete.

2.When the screen displays the entry you want to delete, press SELECT. Then press or until ERASE flashes.

SPEED EDIT ERASE 8005959511

01

3.Press SELECT. The screen displays ERASE NO YES and the number.

4.Press or until YES flashes.

5.Press SELECT.You’ll hear a confirmation beep.

14