VTech LS6375-3, IS6100, LS6325-2 user manual Handset battery charging, Displays Place in charger

Page 10

Getting started

Handset battery charging

Once you have installed the handset battery, the screen indicates the battery status (see the table below). If necessary, place the handset in the telephone base or charger to charge the battery. For best performance, keep the handset in the telephone base or charger when not in use. The handset battery is fully charged after 16 hours of continuous charging. See the table on page 61 for battery operating times.

If the screen is blank or displays Place in charger, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. When the battery is low, the handset displays Low battery along with a flashing icon. If you are on a call in low battery mode, the handset plays short beeps to alert you.

The following table summarizes the battery charge indicators and actions to take.

Battery indicators

Battery status

Action

 

 

 

 

 

 

 

 

 

The screen is blank, or

Battery has very little or

Charge without interruption

displays Place in charger

no charge. The handset

(at least 30 minutes).

and

 

flashes.

cannot be used.

 

 

 

 

 

 

 

 

 

 

The screen displays

Battery has enough

Charge without interruption

Low battery and

 

 

 

flashes.

charge to be used for a

(about 30 minutes).

 

 

 

 

 

 

 

 

 

short time.

 

 

 

 

 

 

 

 

 

 

The screen displays

Battery is charged.

To keep the battery charged,

HANDSET X.

 

place it in the telephone

 

 

 

 

 

 

 

 

base or charger when not

 

 

 

 

 

 

 

 

in use.

If you place the handset in the telephone base or charger without plugging in the battery, the screen displays No battery.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents User’s manual Congratulations Table of contents Appendix Answering system settingsAnswering system operation IndexParts checklist Getting startedTelephone base and handset charger installation Installation options Tabletop to wall mount installationWall mount to tabletop installation See Telephone base and handset charger installation onHandset battery installation Charge lightHandset battery charging Displays Place in chargerPower on the headset Headset charger installationHeadset charging To remove the earbud from the headset earpiece Headset attachmentsEarbud To attach the earbud to the headset earpieceTo adjust the headset to wear on your right ear Ear hookTo remove the ear hook from the headset To attach the ear hook to the headset Head band To attach the head band to the headset To remove the head band from the headset Handset layout Dialing keysMENU/SELECT Push to Talk PTT VOL and VOL Telephone base layoutUSE light Message windowEarpiece Rotating clip +/ -/VOLUME Inset buttonHeadset layout MicrophoneRinger volume headset Ringer volume telephone baseRinger volume handset Ringer toneLCD language To manually turn off these indicatorsTurn off indicator? Clear voicemailKey tone Set date/timeHome area code CID time synchronizationHome area code, then press MENU/SELECT Dial mode WebsitePredial a call Listening volumeMake a call Answer a callTemporary ringer silencing MuteTemporary tone dialing Call waiting Find handset/headsetEqualizer To access a number on the redial list while on a call To access a number in the directory while on a callTo access a number in the call log while on a call Chain dialingDelete a redial entry Redial listDial a redial entry Multiple handset/headset useIntercom Transfer/share a call using intercom Answer an incoming call during an intercom callTo share the call, press MENU/SELECT on PTT On/Off Push to talk PTTTo turn PTT on or off PTT to a single handset Press MENU/SELECT or Push to TalkPTT to all handsets Answer PTT Change a one-to-one PTT to intercomMake an outgoing call during PTT End PTTAnswer an incoming call during PTT To end or leave PTTDirectory Store a directory entry Enter NumberCharacter chart Characters by number of key pressesDial a directory entry Search the directoryAlphabetical search To search the directoryDelete a directory entry Edit a directory entryDelete contact? About caller ID Information about caller ID with call waitingMemory match Call logIs already in it, Not available at this time appears Review the call log Missed call indicatorView dialing options Save a call log entry to the directory Dial a call log entryDisplays Edit Number To delete one entry Delete the call log entriesCall log display screen messages To delete all entriesTo turn on or off with the telephone base Answering system setupAnswer ON/OFF To turn on or off with a handsetNumber of rings Call screeningPress MENU/SELECT to highlight Call screening Remote access code Message alert tonePlay your announcement AnnouncementRecord your own announcement Delete your announcementAnswering system and voicemail Message capacityMessage playback New message indicationCall intercept To play messages with the telephone baseTo play messages with a handset To delete all messages with the telephone base Delete all messagesRecord, play and delete memos To delete all messages with a handsetMessage window displays Window display DescriptionRemote access CommandAppendix Handset display screen messagesThere is no telephone line connected Telephone base lights Handset and telephone base indicators Handset lightsHandset icons Headset indicators Headset alert tones Headset lightsHandset battery Headset battery Conserve battery lifeAdd and register a handset optional Expand your telephone systemTo register a handset Add and register a headset optional To register a headsetReplace a handset/headset To resetTo deregister all handsets and headset There is no dial tone TroubleshootingMy telephone does not work at all Cannot dial out from my cordless handsetTelephone does not ring when there is an incoming call Low battery shows on screenCharge light on the handset is off My handset beeps and is not performing normally Hear other calls when using the cordless handset/headsetHear noise on the cordless handset and the keys do not work My headset does not work at all Other party cannot hear my voice during a callRegistration failed appears on the handset Blue or red light keeps flashing on the headset keyLight on the headset is off while charging My cordless headset is not performing normallyMy caller ID features are not working properly Cannot register a cordless headsetNew voicemail show on the display and I don’t know why Caller ID entries do not match the numbers I need to dialOut of range or No pwr at base shows on the handset screen Cannot retrieve voicemail messagesAnswering system does not record messages Answering system does not respond to remote commandsOutgoing announcement is not clear Messages on the answering system are very difficult to hearCommon cure for electronic equipment Important safety instructions Maintenance Precautions for users of implanted cardiac pacemakersOperating range About cordless telephones Rbrc sealWarranty What does this limited warranty cover?Other limitations FCC, Acta and IC regulations FCC PartIndustry Canada Technical specifications Index Index 91-003840-020-100
Related manuals
Manual 8 pages 24.96 Kb Manual 2 pages 59.8 Kb Manual 36 pages 58.39 Kb

LS6375-3, LS6325-2, IS6100 specifications

The VTech IS6100 is an innovative cordless phone system that caters to the modern user's needs while providing exceptional functionality and convenience. At the core of its design is a blend of advanced technology and user-friendly features that make it a standout choice for home and office use.

One of the defining features of the VTech IS6100 is its DECT 6.0 technology, which ensures secure, interference-free communication. This technology not only enhances voice clarity but also extends the range of the phone, allowing users to communicate seamlessly throughout their homes or offices without worrying about signal loss. The system comes with a range of up to 1,000 feet outdoors and about 300 feet indoors, making it a practical choice for larger spaces.

The IS6100 is equipped with a digital answering system that has a recording time of up to 14 minutes. Users can enjoy the convenience of retrieving messages from anywhere in the home, as the answering system can be accessed remotely. The phone also features a bright, easy-to-read LCD display that simplifies navigation through its various functions, including caller ID and call waiting features that keep users informed about incoming calls.

One of the highlights of the VTech IS6100 is its ability to link to mobile devices via Bluetooth, enabling users to make and receive calls through their smartphones. This feature is particularly beneficial for those who prefer to keep their mobile device close at hand while still enjoying the advantages of a traditional phone system. The multiple device capability allows users to connect up to two cell phones, ensuring they never miss important calls.

Additionally, the IS6100 incorporates an intercom feature, which facilitates smooth communication between handsets, making it ideal for families or office environments. The phone can support up to five handsets, allowing for greater flexibility when it comes to communication and collaboration.

The VTech IS6100 also boasts a user-friendly design, with large buttons and an intuitive menu system that appeals to all ages. The phone is designed with energy efficiency in mind, featuring a power-saving mode that contributes to its eco-friendly profile. With its combination of advanced technology, intuitive features, and practical design, the VTech IS6100 stands as a reliable and versatile choice for anyone seeking a modern cordless phone solution.
Top Page Image Contents