
Base Settings
To access Base Settings, with the Base in the idle (OFF) mode, press MENU, scroll down to BASE SETTINGS, then press OK. You can now access the following setting options:
•RINGER VOLUME
•RINGER MELODY
•KEYPAD TONE
| • | TONE/PULSE |
OperationsBasic | • | CONTRAST |
RINGERVOLUME | ||
| • | LANGUAGE |
| Press CLEAR at any time to back out of Base Settings mode. | |
| To adjust the Base Unit ringer volume: |
• | Press MENU. Scroll down to BASE | |
| SETTINGS, then press OK. RINGER | |
| VOLUME will be highlighted. Press OK | |
| again. You will see a graph on the Base | |
| display indicating the relative volume set- | |
| ting. |
|
• | Press | to lower the ringer volume. |
| At the lowest setting (graph is com- | |
| pletely clear), the Base will not ring | |
| when a call comes in. | |
• | Press | to raise the volume. At the |
| loudest setting, the graph is completely | |
| shaded in. |
|
•Press OK to confirm your setting.
RINGER MELODY
There are 8 Base ringer melody choices. To change the melody:
•Press MENU. Scroll down to BASE SETTINGS, then press OK. Scroll down to RINGER MELODY.
•Press OK. Use the either scroll key to sample the melodies.
•Press OK to confirm your selection.
24