VTech VT9127 Installation, Operation Belt Clip, Do not pull up from the bottom of the clip

Page 19

OPTIONAL HEADSET INSTALLATION

Your VT9127 cordless telephone is equipped with a 2.5mm Headset Jack for use with an optional accessory Headset for hands-free operation.

If you choose to use the Headset option, you must do the following:

INSTALLATION

*Obtain an optional accessory Headset, which is

compatible with the VT9127.

Please contact VTECH Communications Customer Service, in the U.S. toll-free at 1-800-595-9511. In Canada, call 1-800-267-7377 for dealer information in your local area. You can also purchase a compatible Headset directly from VTECH Communications Customer Service.

* Once you have a compatible 2.5mm Headset, locate the Headset Jack on the Handset of your VT9127. Connect the plug on the Headset to the jack on the cordless Handset(under a small rubber flap). The plug should fit securely. Do not force the connection. See illustration.

OPERATION

NOTE: Whenever a compatible Headset is connected to the cordless Handset, the microphone on the Handset will be MUTED. This is done to limit the effect of background noise.

BELT CLIP

*The VT9127 is also equipped with a detachable belt clip. Align the pins on the inside edge of the belt clip with the notches on the side of the VT9127 Handset. The belt clip should snap securely into place. Do not force the connection. See illustration.

* To remove the belt clip, pry it away from either side, where the pins are secured in the Handset notches.

Do NOT pull up from the bottom of the clip!!!

19

ADVANCED OPERATION

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Table of Contents Important Safety Instructions Parts Check List Handset Layout Base Layout Follow these Instructions Installation of Battery Pack in HandsetSetting UP Your VT9127 TONE/PULSE Selection Ringer SelectionPress PROG/CHAN Handset Display Handset is in idle modeChannel Changing Volume ControlBasic Operation Making CallsAnswering Calls Using RedialFlash Hold Review Caller ID Caller ID/CALL Waiting IDReceiving and Storing Calls About Caller IDDial a Displayed Number Deleting Records from Call HistoryStore a Caller ID Record in Phone Book Memory Err Display Screen MessagesStore Memory Numbers Phone BookDelete Numbers Stored in Memory Edit Numbers Stored in MemoryDial Memory Numbers Until Messages Waiting is Message WaitingOperation Belt Clip InstallationDo not pull up from the bottom of the clip Avoid Water MaintenanceCleaning Your Telephone Avoid Rough TreatmentVtech Communications at Case of DifficultyPhone DOESN’T Work AT ALL No Dial ToneCommon Cure for Electronic Equipment Handset does not Ring When YOU Receive a CallYOU Hear Other Calls While Using Your Phone Your Caller Fades in and OUTWhat does this limited warranty cover? Limited WarrantyLimitations How do you get warranty service?VTech Communications Inc FCC, Acta and IC RegulationsConnection and use with the nationwide telephone network Rbrctm Seal Technical Specifications Page Issued
Top Page Image Contents