GETTING STARTED
Check for a dial tone. After the battery pack is charged, rotate the Base Unit antenna to an upright position. Pick up the Handset and press PHONE . "PHONE ON" will appear on the LCD, and you will hear a dial tone. If not, see ‘IN CASE OF DIFFICULTY’ on page 34.
Fill in the telephone number card on the base unit.
FILL IN THE
TELEPHONE
NUMBER
CARD
MEMORY
1
2
3
4
5
6
7
8
9
10
CAUTION:
1.Never install telephone wiring during a lightning storm.
2.Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
3.Never touch uninsulated telephone
wires or terminals unless the t e l e p h o n e l i n e h a s b e e n disconnected at the network interface.
4.Use caution when installing or modifying telephone lines.
14
1920manual | 14 | 1/28/99, 3:27 PM |