Quick Reference Guide

SET-UP

•Plug AC adaptor into a standard electrical outlet and Base Unit

•Set Dial Mode switch to PULSE or TONE. The unit is factory set to TONE.

•Let the handset battery pack charge for 16 hours before first use.

•Connect telephone line cord to base unit and telephone jack.

MAKING CALLS

•Press the PHONE key. When the "PHONE ON" indicator is displayed and you hear a dial tone, dial the number.

•Enter the number to be dialed on the LCD and then press the PHONE key.

TO MUTE A CALL

•Press MUTE to disable the handset microphone.

• Press MUTE again to return to normal two way conuersation.

TO PAGE THE HANDSET

•To page from the base, press

PAGE .

•To cancel the PAGE either press PAGE again on the base or press OFF on the handset.

STORING MEMORY (SPEED) DIAL NUMBERS:

•The phone should be OFF.

•Enter the number you wish to store on the LCD up to a maximum of 20 digits.

ANSWERING CALLS

•To answer a call, press any key other than OFF , MUTE , or the Volume Keys. The handset will NOT auto-answer when lifted off the base cradle.

HANGING UP

•Press OFF or place the handset in the cradle to hang up a call.

FLASH

	PAUSE
PHONE	HOLD	OFF
	HOLD
1	2 abc	3 def
4 ghi	5 jkl	6 mno
7 pqrs	8 tuv	9 wxyz

*	0 oper	#
tone

MEM CID REDIAL

PROG CLR/DEL MUTE

STORING

THE PHONE SHOULD BE

OFF

ENTER PHONE NUMBER

PRESS PROG

YOU WILL SEE

ENTER MEMORY

LOCATION (01-20)

TO PLACE A CALL ON HOLD

•Press HOLD on the handset to place an active call on hold. Press HOLD again to return to the call.

•Press PROG . The LCD will display "PROGRAM LOCATION "

•Enter a two digit memory location (01 .. 20), the unit will store the number, emit a happy tone to confirm successful programming and exit program mode.

1920manual

1/28/99, 3:27 PM