Basic Operation
Base Menu Soft Functions
Base Settings
To access base settings, with the base in the idle (off) mode, press MENU, scroll down to BASE SETTINGS, then press SELECT. You can now access the following setting options:
CLOCK SETTING | RINGER VOLUME | RINGER MELODY |
KEYPAD TONE | CONTRAST | DIAL TYPE |
CLEAR MSG WAIT | FACTORY SETTINGS | DELETE HANDSETS |
PRODUCT ID |
|
|
Press CLEAR at any time to back out of the base settings mode.
Clock Setting
If you subscribe to caller ID, the clock will automatically be set when the first call is received. If you don’t have caller ID or wish to set the clock manually:
•Press MENU, then scroll to BASE SETTINGS.
•CLOCK SETTINGS will be highlighted, press SELECT.
•Press the CHANGE softkey to change the first digit of the hour, press NEXT. (Follow this procedure to change the remaining digits of the time and select AM or PM.)
•When finished, press SET, you’ll hear a confirmation tone.
Ringer Volume
To adjust the base unit ringer volume:
•Press MENU. Scroll down to BASE SETTINGS, then press SELECT. Use the up and down softkeys to RINGER VOLUME, press SELECT. You will see a graph on the base display indicating the current volume setting.
•Press the 
softkey to lower the ringer volume. At the lowest setting (graph is completely clear), the base will not ring when a call comes in.
•Press the 
softkey to raise the volume. At the loudest setting, the graph is completely shaded in.
•Press SET to confirm your setting.
NOTE: When the phone is ringing, press QUIET
softkey or CLEAR key to temporarily mute the
ringer.
Ringer Melody
There are six base ringer melody choices. To change the melody:
•Press MENU. Scroll down to BASE SETTINGS, press SELECT. Scroll down to
RINGER MELODY.
•Press SELECT. Use either scroll key to sample the melodies.
•Press SET to confirm your selection.
SET
RINGER MELODY 4
SET
34