VTech CS5123 user manual Troubleshooting, Problem Suggestion

Page 51

Troubleshooting

If you have difficulty with your telephone, please try the suggestions below. For Customer Service, visit our website at www.vtechphones.com, or call 1 (800) 595-9511; in Canada, call 1 (800) 267-7377.

Problem

Suggestion

My telephone does not

Make sure the battery is installed and charged correctly (page 3). For optimum daily

work at all.

 

performance, return the handset to the telephone base after use.

 

Make sure the power adapter is securely plugged into an outlet not controlled by a wall

 

 

switch.

 

• Make sure the telephone line cord is plugged firmly into the telephone base and the wall jack.

 

Unplug the unit’s electrical power. Wait for approximately 15 seconds, then plug it back in.

 

 

Allow up to one minute for the handset and telephone base to synchronize.

 

• Charge the battery in the handset for at least 16 hours.

 

• Remove and re-insert the battery. If that still does not work, it may be necessary to purchase

 

 

a new battery.

 

• Disconnect the telephone base from the jack and plug in a working telephone. If this telephone

 

 

does not work, the problem is probably in the wiring or the local service. Call the local telephone

 

 

company.

LOW BATTERY is

Place the handset in the telephone base or charger for recharging.

displayed on screen.

Remove and re-install the battery and use it normally until fully depleted, then recharge the

 

 

handset on the telephone base for 16 hours.

 

• If the above measures do not correct the problem, the battery may need to be replaced.

 

 

 

www.vtechphones.com

47

Appendix

Image 51
Contents User’s manual Congratulations Important safety instructionsTable of contents Appendix Getting started Parts checklistTelephone base installation Battery installation and charging Wall mounting bracket installation Mounting bracket installationDesktop/tabletop bracket installation VOL-/CID Handset layoutDelete Telephone base layoutDate and time Telephone settingsRinger Ringer volume handsetHome area code Dial modeLanguage Telephone operation Temporary tone dialing Call waitingFind handset RedialStore a directory entry DirectoryReview the directory Character chartEdit a directory entry Delete a directory entry Dial a number from the directory Copy a directory entry into speed dialStore a speed dial entry Speed dialEdit a speed dial entry Dial a speed dial number Delete a speed dial entryReassign speed dial locations About caller ID Call log Make call log entries ready to dial Review the call logDial a call log number Entries ready to dial section on Save a call log entry to the directoryDelete an entry Delete from the call logDisplays When Call log display screen messagesMessage capacity Answering systemSet the clock Activate the answering systemSet number of rings Answering system setupSet telephone base ringer Set remote access codeSet message alert tone Play your announcement Outgoing announcementDelete your announcement Record your own announcementNew message indication Message playbackOptions during playback Memo playback Delete all messagesRecord and play memos Record a memoCall intercept Call screeningWindow displays When Message window displaysCommand Function Remote accessHandset display screen messages Handset ringer is turned off Battery Important safety instructions Problem Suggestion TroubleshootingCharge light is off in this section Connecting To take place Your area. See Dial mode on page 10 to set the dial type Telephone company charges may apply Remove and re-insert the battery Dial or store from the call log Troubleshooting Troubleshooting Operating range MaintenanceAbout cordless telephones WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsRbrc seal Technical specifications Index Temporary tone dialing  91-002140-020-100