VTech CS5123 user manual Charge light is off in this section

Page 52

Troubleshooting

Problem

Suggestion

 

 

 

The battery does not

Make sure the handset is placed in the telephone base correctly. The handset CHARGE light

charge in the handset

 

should be on.

or the handset battery

Remove the battery from the handset and then re-install it in the handset. Put the handset

does not accept

 

back to the telephone base and charge for 16 hours.

If the handset is in the telephone base but the handset CHARGE light is not on, see The

charge.

 

 

charge light is off in this section.

 

• It may be necessary to purchase a new battery. Please see the Battery section of this user’s

 

 

manual (page 45).

 

• The telephone might be malfunctioning. Please see the Warranty section of this user’s manual

 

 

(page 58) for further instruction.

 

 

 

The CHARGE light is

Clean the charging contacts on the handset(s) and telephone base each month using a pencil

off.

 

eraser or a dry non-abrasive fabric.

 

Make sure the power adapter and telephone line cords are plugged in correctly and

 

 

securely.

 

Unplug the power adapter. Wait for 15 seconds before plugging it back in. Allow up to one

 

 

minute for the handset and telephone base to reset.

 

• The telephone might be malfunctioning. Please see the Warranty section of this user’s manual

 

 

(page 58) for further instruction.

 

 

 

48

www.vtechphones.com

Image 52
Contents User’s manual Important safety instructions CongratulationsTable of contents Appendix Parts checklist Getting startedTelephone base installation Battery installation and charging Mounting bracket installation Wall mounting bracket installationDesktop/tabletop bracket installation Handset layout VOL-/CIDTelephone base layout DeleteTelephone settings Date and timeRinger volume handset RingerDial mode Home area codeLanguage Telephone operation Call waiting Temporary tone dialingRedial Find handsetDirectory Store a directory entryCharacter chart Review the directoryEdit a directory entry Delete a directory entry Copy a directory entry into speed dial Dial a number from the directorySpeed dial Store a speed dial entryEdit a speed dial entry Delete a speed dial entry Dial a speed dial numberReassign speed dial locations About caller ID Call log Review the call log Make call log entries ready to dialDial a call log number Save a call log entry to the directory Entries ready to dial section onDelete from the call log Delete an entryCall log display screen messages Displays WhenAnswering system Message capacityActivate the answering system Set the clockAnswering system setup Set number of ringsSet remote access code Set telephone base ringerSet message alert tone Outgoing announcement Play your announcementRecord your own announcement Delete your announcementMessage playback New message indicationOptions during playback Delete all messages Record and play memosRecord a memo Memo playbackCall screening Call interceptMessage window displays Window displays WhenRemote access Command FunctionHandset display screen messages Handset ringer is turned off Battery Important safety instructions Troubleshooting Problem SuggestionCharge light is off in this section Connecting To take place Your area. See Dial mode on page 10 to set the dial type Telephone company charges may apply Remove and re-insert the battery Dial or store from the call log Troubleshooting Troubleshooting Maintenance Operating rangeWarranty About cordless telephonesHow do you get warranty service? FCC, Acta and IC regulations FCC PartRbrc seal Technical specifications Index Temporary tone dialing  91-002140-020-100