FCC & IC REGULATIONS
IC (Industry Canada)
This telephone is registered for use in Canada.
Notice:The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network, protective, operational and safety require- ments. Industry Canada does not guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an ac- ceptable method of connections. The customer should be aware that compliance with the above conditions may not prevent degradation of service in situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility des- ignated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power util- ity, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
Caution:Users should not attempt to make such connections themselves, but should contact appro- priate electric inspection authority, or electrician, as appropriate.
The Load Number (LN) assigned to this device denotes the percentage of the total load to be con- nected to a telephone loop which is used by the device to prevent overloading. The termination on a loop may consist of any combination of devices subject only to the requirement that the total of the load numbers of all devices does not exceed 100.
This device complies with
undesired operation of the device.
TECHNICAL SPECIFICATIONS
FREQUENCY CONTROL
Crystal Controlled Dual PLL Synthesizer
TRANSMIT FREQUENCY
Handset: | 925.05 MHz to 927.75 MHz (All ten channels within this range) |
Base: | 902.3 MHz to 905.0 MHz (All ten channels within this range) |
RECEIVE FREQUENCY | |
Handset: | 902.3 MHz to 905.0 MHz (All ten channels within this range) |
Base: | 925.05 MHz to 927.75 MHz (All ten channels within this range) |
NOMINAL EFFECTIVE RANGE
Maximum power allowed by FCC and IC. Actual operating range may vary according to environ- mental conditions at the time of use.
SIZE |
|
Handset: | 18.2cm x 6.2cm x 3.8cm (L x W x T) maximum (antenna excluded) |
Base: | 21.0cm x 14.8cm x 5.5cm (L x W x T) maximum (antenna excluded) |
WEIGHT |
|
Handset: | 250grams |
Base: | 450grams |
POWER REQUIREMENTS
Handset:
Power Adaptor: 9VDC@300mA
15