FUNCTIONAL LAYOUT FOR HANDSET UNIT
LINE 2 KEY | LOW BATT LED |
VOLUME SLIDE SWITCH | OFF KEY |
LINE 1 KEY |
|
| NUMBER KEYS |
* TONE KEY |
|
CHAN KEY | MEM KEY |
PROG KEY | |
REDIAL KEY | HOLD KEY |
CONF KEY |
FUNCTION KEYS
keys | Description |
LINE 1 | To get dial tone when handset |
| in standby mode. |
| To perform flash operation |
| when handset is in Talk mode. |
LINE 2 | To get dial tone when handset |
| in standby mode. |
| To perform flash operation |
| when handset is in Talk mode. |
|
|
OFF | To hang up a line. |
Number | For telephone number dialing, |
keys | programming, etc. |
*TONE | To change the dialing mode |
| temporarily from pulse to tone |
| during a call. |
|
|
PROG | To enter/exit the programming mode. |
CHAN | To change the channel during |
| a call. |
HOLD | To place a call on HOLD. |
| To add a 2 second pause during |
| telephone number programming. |
MEM | To enter memory dialing mode. |
CONF | To establish a conference call |
| between Line 1 and Line 2 |
REDIAL | To redial the last number dialed. |
Handset | To select the handset volume |
volume | Hight (H), Middle or Low (L) |
slide |
|
switch |
|
LED | LED status | Description |
LINE 1 | ON | When handset is |
|
| connected to line 1. |
| Flash | When line1 is ON |
| (fast) | HOLD |
| Flash | When line 1 is used by |
| (double | a parallel connected |
| flashing) | telephone. |
| Flash | When there is incoming |
| (with ringing | call for line 1 |
| singal) |
|
LINE 2 | ON | When handset is |
|
| connected to line 2 |
| Flash | When line 2 is ON |
| (fast) | HOLD |
| Flash | When line 2 is used by |
| (double | a parallel connected |
| flashing) | telephone. |
| Flash | When there is incoming |
| (with ringing | call for line 2 |
| singal) |
|
LOW | Flash | To indicate low battery |
BATT |
| condition |
|
|
|
7