NIT |
| BASIC OPERATION |
|
MAKING CALLS
•From the Handset, press the desired LINE key (LINE 1 or LINE 2).
•The appropriate LINE key will glow to indicate the line is in use.
•After listening for a dial tone, dial the phone number.
•To end your call, either return the Handset to the Base Unit cradle, or press the OFF key on the Handset.
ANSWERING CALLS
From the Handset:
•As your 921 ADL rings to alert you to an incoming call, the appropriate LINE key flashes.
•Press the flashing LINE key to answer the call.
•Press OFF, or return the Handset to the Base Unit cradle to end your call.
Easy Answer
When the Handset is in Standby mode (neither line is in use) and away from the Base Unit, to answer an incoming call, you can press the appropriate LINE key, or any number key (0 - 9, * or #). This will aid you in answering calls in a dark environment.
MAKING OR ANSWERING A CALL ON ONE LINE WHILE THE OTHER LINE IS ALREADY IN USE
NOTE: For
From The Handset
If you are on a call, and you wish to either make or answer a call on the unused line, you can:
Press OFF to end your original call, then press the other LINE key; or
Press the other LINE key first. Your original call will automatically be placed on HOLD. You now have the following options:
Press OFF to end the call you're currently on, then press the other LINE key to return to the original call;
or
CONFERENCE Lines 1 and 2 together. For more details, see ADVANCED
OPERATIONS- CONFERENCE CALLING.
PAGE/HANDSET LOCATOR
From the Base Unit, press the PAGE key. The Handset will ring for approximately 60 seconds. During this time, the Handset user can:
•Locate where the handset is.
•Press OFF to terminate the ringing; or
•Ignore the Page from the Base Unit.
Since it will ring for approximately 60 seconds when PAGE is pressed on the Base Unit this feature can be helpful in locating a misplaced Handset.
SETTING HANDSET VOLUME
Set the Handset Volume switch to High (H), Middle, or Low (L), depending on your prefer- ence.
The Volume switch is located on the
9