Advanced Features
34
Remote Monitor
Use the Remote Monitor feature to turn on the microphone of a target radio (subscriber alias or IDs only). No audible or visual indication is given to the target radio. You can use this feature to monitor, remotely, any audible activity surrounding the target radio.
Your radio must be programmed to allow you to use this feature.
Initiating Remote Monitor
Procedure:
Use the programmed Remote Monitor button.
1Press the programmed Remote Monitor button.
2^or vto the required subscriber alias or ID and press c to select.
3The display shows transitional mini notice, indicating the request is in progress. The LED lights up solid green.
4Wait for acknowledgement.
5If successful, a positive indicator tone sounds and the display shows mini notice. Your radio starts playing audio from the monitored radio for a programmed duration and display shows Rem. Monitor.
Once the timer expires, the radio sounds an alert tone and the LED turns off.
OR
If unsuccessful, a negative indicator tone sounds and the display shows mini notice.
OR
Procedure:
Use the menu.
1cto access the menu.
2^or vto Contacts and press cto select.
3^or vto the required subscriber alias or ID and press c to select.
OR
^or vto Manual Dial and press cto select.
If there was previously dialed ID, the ID appears along with a blinking cursor. Use the keypad to edit the ID. Press cto select.
OR
^or vto Manual Dial and press cto select. Key in the subscriber alias or ID and press cto select.
4^or vto Rem. Monitor. and press cto select.
5The display shows transitional mini notice, indicating the request is in progress. The LED lights up solid green.
6Wait for acknowledgement.
English