3^ or v to select Set Active List and press c to select.
4^ or v to required list and press c to select.
NOTE: The list selected will be your active scan list.
Starting and Stopping Scan
Procedure:
Press the programmed Scan button to start or stop Scan.
OR
Follow the procedure below.
1cto access the menu.
2^ or vto Scan and press cto select.
3^ or vto Scan State and press cto select.
4^or vto required scan state and press c to select.
5The display shows Scan On when scan is enabled. The LED blinks yellow and the scan icon appears.
OR
The display shows Scan Off when scan is disabled. The LED turns off and the scan icon disappears.
While scanning, the radio will only accept data (e.g. text message, location, or PC data) if received on its Selected Channel.
Responding to a Transmission During a Scan
During scanning, your radio stops on a channel where activity | Advanced | ||
(e.g. a group call) targeted for the radio is detected. Your radio | |||
| |||
unmutes and the incoming call sounds through the radio's |
| ||
speaker. |
| ||
The radio remains on that channel while the activity is present |
| ||
and for a programmed time period (known as "hang time") after |
| ||
the activity ceases. | Features | ||
| If the Channel Free Indication feature is enabled, you will | ||
Procedure: |
| ||
1 | Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from |
| |
| your mouth. |
| |
| hear a short alert tone the moment the transmitting radio |
| |
| releases the PTT button, indicating the channel is free for |
| |
| you to respond. |
| |
2 | Press the PTT button during hang time. The LED lights up |
| |
| solid green. |
| |
3 | Wait for the Talk Permit Tone to finish (if enabled) and speak |
| |
| clearly into the microphone. |
| |
4 | Release the PTT button to listen. |
| |
5 | If you do not respond within the hang time, the radio returns |
| |
| to scanning other channels/groups. |
| |
|
| 39 | |
English