Motorola SL7550 manual Password Lock Features,  Accessing the Radio from Password

Advanced Features

76

Password Lock Features

If enabled, this feature allows you to access your radio via password upon powering up.

Accessing the Radio from Password

Procedure:

Power up the radio.

1You hear a continuous tone.

2Enter your current four-digit password with the radio’s

keypad. The second line of the display shows ●●●●. Press c to proceed.

OR

Enter your current four-digit password. Press ^or vto edit each digit’s numeric value. Each digit changes to ●. Press > to move to next digit. Press cto confirm your selection.

You hear a positive indicator tone for every digit pressed. Press <to remove the last ● on the display. You hear a negative indicator tone, if you press <when the second line of the display is empty, or if you press more than four digits.

3If the password is correct:

Your radio proceeds to power up. See Powering Up the Radio on page 4.

OR

If the password is incorrect:

The display shows Wrong Password. Repeat Step 2. Password less than four digits is incorrect.

OR

After the third incorrect password, the display shows Wrong Password and then, shows Radio Locked. A tone sounds and the LED double blinks yellow.

Your radio enters into locked state for 15 minutes, and responds to inputs from On/Off Button and programmed Backlight button only.

NOTE: The radio is unable to receive any call, including emergency calls, in locked state.

Unlocking the Radio from Locked State

Procedure:

Wait for 15 minutes. Repeat Steps 1 to 3 in Accessing the Radio from Password on page 76.

OR

Power up the radio, if you have powered down the radio during locked state:

1A tone sounds and the LED double blinks yellow. The display shows Radio Locked.

2Wait for 15 minutes. Repeat Accessing the Radio from Password on page 76.

English