Grandstream Networks GXP-2020 user manual Device Configuration Status Definitions

Table 10: Device Configuration - Status Definitions

Hardware Revision	Hardware version number: Main Board, Interface Board
MAC Address	The device ID, in HEXADECIMAL format.
IP Address	This field shows IP address of GXP-2020
Product Model	This field contains the product model information.
Software Version	• Program: This is the main software (firmware) release number, always used to
	identify the software (firmware) system of the phone.
	• Boot: Booting code version number
System Up Time	This field shows system up time since the last reboot.
Registered	Indicates whether accounts are registered to the related SIP server(s). GXP-2020 can
	support four unique SIP profiles.
PPPoE Link Up	Inidicates whether the PPPoE connection is enabled (connected to a modem).

Table 11: Device Configuration – Basic Settings Definitions

End User	This contains the password to access the Web Configuration Menu. This field is
Password	case sensitive with a maximum length of 25 characters.
IP Address	There GXP-2020 operates in two modes:
	1.	DHCP mode: all the field values for the Static IP mode are not used (even
		though they are still saved in the Flash memory.) The GXP-2020 acquires
		its IP address from the first DHCP server it discovers on its LAN. The
		DHCP option is reserved for NAT router mode. To use the PPPoE feature,
		set the PPPoE account settings. The GXP-2020 establishes a PPPoE
		session if any of the PPPoE fields are set.
	2.	Static IP mode: configure all of the following fields: IP address, Subnet
		Mask, Default Router IP address, DNS Server 1 (primary), DNS Server 2
		(secondary). These fields are set to zero by default.
Multi purpose key 1-7	These options are used to assign a function to the corresponding multi purpose key.
	Options available are: “Speed dial”, “Asterisk BLF”, “Presence Watcher” and
	“Eventlist BLF”.
	Each function is connected to one of the 6 accounts and has a target user ID.
Time Zone	This parameter controls the date/time display according to the specified time zone.
Daylight Savings Time	This parameter controls time displayed in daylight savings time or not. If set to
	“Yes”, then the displayed time will be 1 hour ahead of normal time.
Time Display Format	LCD time display in 12 hour or 24 hour format
Date Display Format	Choose one of the following formats:
	•	Year-Month-Day
	•	Month-Day-Year
	•	Day-Month-Year

Grandstream Networks, Inc.	GXP–2020 Users Manual	Page 24 of 33
	Firmware 1.1.4.3	Last Updated: 05/2007