Avaya 8400-SES manual Configure Communication Manager Server Interface

Page 15

6.2. Configure Communication Manager Server Interface

This section provides steps to add SIP-enabled media servers to the SIP domain. In the Integrated Management SIP Server Management page, select the Communication Manager Servers List link from the left pane of the screen. The following screen shows the List Communication Manager Servers page. Prior to the compliance test, the Communication Manger Server Interface was already configured.

Click the Map link to go to the Add Address Map screen for that Communication Manager server.

CRK; Reviewed:

Solution & Interoperability Test Lab Application Notes

15 of 21

SPOC 7/1/2011

©2011 Avaya Inc. All Rights Reserved.

Polycom8400-SES

Image 15
Contents Abstract Interoperability Compliance Testing IntroductionGeneral Test Approach and Test Results Reference Configuration Test ResultsSupport Test Configuration of SpectraLink 8400 Series Configure the Avaya Aura Communication Manager Equipment and Software ValidatedEquipment Software/Firmware Used Optional FeaturesOptional Features IP Port Capacities Used Capacity VerificationIP Codec Set ## SET ENABLEG711U## SET Dtmfpayloadtype Configure IP Network RegionSET ENABLEG722 ## SET G726PAYLOADTYPEConfigure SIP Signaling Configure IP Node NameConfigure SIP Trunk Signaling GroupTrunk Group ∙ Application Set to OPS Configure SIP Endpoint∙ Config Set Set to ∙ Type Set to 9630SIPExtensions to Call Which Activate Features by Name Configure SIP Enablement Services Server Properties Configure SIP Enablement ServicesPage Configure Communication Manager Server Interface Click on the Add button ∙ PatternConfigure Users Page Configure SpectraLink 8400 Series Additional References PhoneconfigVerification Steps ConclusionAvaya Inc. All Rights Reserved