Avaya 8400-SES manual Test Configuration of SpectraLink 8400 Series

Page 4

Figure 1: Test Configuration of SpectraLink 8400 Series

CRK; Reviewed:	Solution & Interoperability Test Lab Application Notes	4 of 21
SPOC 7/1/2011	©2011 Avaya Inc. All Rights Reserved.	Polycom8400-SES

Image 4

Contents Abstract Introduction Interoperability Compliance TestingGeneral Test Approach and Test Results Test Results Reference ConfigurationSupport Test Configuration of SpectraLink 8400 Series Equipment and Software Validated Configure the Avaya Aura Communication ManagerEquipment Software/Firmware Optional Features Optional Features IP Port Capacities UsedCapacity Verification Used## SET ENABLEG711U IP Codec SetConfigure IP Network Region SET ENABLEG722## SET G726PAYLOADTYPE ## SET DtmfpayloadtypeConfigure IP Node Name Configure SIP SignalingSignaling Group Configure SIP TrunkTrunk Group Configure SIP Endpoint ∙ Config Set Set to∙ Type Set to 9630SIP ∙ Application Set to OPSExtensions to Call Which Activate Features by Name Configure SIP Enablement Services Configure SIP Enablement Services Server PropertiesPage Configure Communication Manager Server Interface ∙ Pattern Click on the Add buttonConfigure Users Page Configure SpectraLink 8400 Series Phoneconfig Verification StepsConclusion Additional ReferencesAvaya Inc. All Rights Reserved