Cisco Systems 7905G, 7902G, 7912G manual Network Setting Description Usage Notes

Chapter 4 Configuring Network Settings on the Cisco IP Phone

Verifying Network Settings

Using the Phone’s Network Configuration Screen (Cisco IP Phone Models 7905G/7912G)

Procedure

Step 1 Press the Menu button.

Step 2 Use the Navigation button to select Settings, and then press the Select softkey.

Step 3 Use the Navigation button to select Network Configuration, and then press the Select softkey.

Step 4 Scroll through the options to display the settings described in Table 4-1.

Table 4-1 Network Settings

Network Setting	Description	Usage Notes
DHCP Server	Displays IP address of the Dynamic Host	See the “Modifying DHCP
	Configuration Protocol (DHCP) server	Settings” section on page 4-9.
	that the phone uses to obtain IP address.
BootP Server	Indicates whether the phone obtains its	Always displays No.
	configuration from a Bootstrap Protocol	Cannot be configured.
	(BootP) server rather than a DHCP server.
MAC Address	Identifies the unique Media Access	Cannot configure.
	Control (MAC) address of the phone.
Host Name	Identifies the unique host name assigned	Obtained from the DHCP
	to the phone.	server.
Domain Name	Identifies the name of the Domain Name	See the “Assigning a Domain
	System (DNS) domain in which the phone	Name” section on page 4-20.
	resides.
IP Address	Indicates the Internet Protocol (IP)	See the “Assigning an IP
	address of the phone.	Address” section on
		page 4-15.
Subnet Mask	Indicates the subnet mask used by the	See the “Assigning a Subnet
	phone.	Mask” section on page 4-19.

	Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01	4-5