Cisco Systems OL-20949-01 manual CiscoIPPhoneDirectory, InputFlag Description

Chapter 3 CiscoIPPhone XML Objects

XML Object Definitions

InputFlag	Description
A	Plain ASCII text—use the DTMF keypad to enter text that consists
	of uppercase and lowercase letters, numbers, and special characters.
T	Telephone number—enter only DTMF digits for this field. The
	acceptable input includes numbers, #, and *.
N	Numeric—enter numbers as the only acceptable input.
E	Equation—enter numbers and special math symbols.
U	Uppercase—enter uppercase letters as the only acceptable input.
L	Lowercase—enter lowercase letters as the only acceptable input.

PPassword field—enter individual characters using the standard keypad-repeat entry mode. The system automatically converts accepted characters into an asterisk, keeping the entered value private.

Note P specifies the only InputFlag that works as a modifier. For example, specify a value of “AP” in the InputFlag field to use plain ASCII as the input type and to mask the input as a password by using an asterisk (*).

During text entry, Cisco Unified IP Phones display softkeys to assist users with text entry. Users can navigate between fields with the vertical scroll button that is used to navigate menus, and so on.

CiscoIPPhoneDirectory

The phone originally incorporated the CiscoIPPhoneDirectory XML object to support the Directory operation of Cisco Unified IP Phones, but it is available for your development purposes also. Figure 3-2shows how an XML CiscoIPPhoneDirectory object displays on the phone.

Figure 3-2 CiscoIPPhoneDirectory Object Display Sample

Definition

<CiscoIPPhoneDirectory> <Title>Directory title goes here</Title> <Prompt>Prompt text goes here</Prompt> <DirectoryEntry>

<Name>The name of the directory entry</Name> <Telephone>The telephone number for the entry</Telephone>

Cisco Unified IP Phone Services Application Development Notes

3-6 OL-20949-01