Cisco Systems OL-20949-01 manual Adding a Phone Service, Field Description

Chapter 9 IP Phone Service Administration and Subscription

Adding a Phone Service

Example

http://<servername>/ccmuser/sample/sample.asp

Where

<servername> designates a fully qualified domain name or an IP address.

Adding a Phone Service

		To access phone service administration, open Cisco Unified Communications Manager Administration
		and choose Device > Device Settings > Phone Services:
		The Cisco Unified Services Configuration page in Cisco Unified Communications Manager
		Administration contains the fields as shown in Table 9-1.
Table 9-1	IP Phone Service Configuration Settings
Field			Description
Service Information
Service Name			Enter the name of the service as it will display on the menu of available
			services in Cisco Unified CM User Options. Enter up to 32 characters
			for the service name.
ASCII Service Name			Enter the name of the service to display if the phone cannot display
			Unicode.
Service Description			Enter a description of the content that the service provides.
Service URL			Enter the URL of the server where the IP phone services application is
			located. Make sure that this server remains independent of the servers
			in your Cisco Unified Communications Manager cluster. Do not
			specify a Cisco Unified Communications Manager server or any server
			that is associated with Cisco Unified Communications Manager (such
			as a TFTP server or directory database publisher server).
			For the services to be available, the phones in the Cisco Unified
			Communications Manager cluster must have network connectivity to
			the server.
Service Category			Select a service application type.
Service Type			Select whether the service will be provisioned to the Services,
			Directories, or Messages button.
Service Vendor			For XML services, you can leave this field blank.
Service Version			You can leave this field blank for XML services.

Cisco Unified IP Phone Services Application Development Notes

9-2 OL-20949-01