Cisco Systems OL-20949-01 manual Phone Models Area Width Area Height 7940G, 7960G

Chapter 3 CiscoIPPhone XML Objects

XML Object Definitions

The Application Status window contains three main areas: (see Figure 3-9):

•Text Area

•Timer Area

•Image Area

Figure 3-9 Elements of Application Status Window

Note Self-terminating XML elements, non-declared or missing elements, and elements with the default values are all considered non-configured elements.

To allow dynamic sizing, do not configure the Text and Timer areas with any value other than the default used by the XML parser. If both elements are not configured, you can proceed, but must follow these rules:

•Do not display the Text Area and Timer Area sections of the Application Status window.

•If the LocationX element is not configured or is set to centered, and the image provided is less than the maximum width allowed, the Image Area can be resized.

•If the image provided is smaller than the minimum width, the minimum allowed window width should be used.

•If the width of the image provided is between the minimum and maximum sizes of the window, the window should be sized to display the image as well as the standard surrounding borders.

•The image height should never change.

See Table 3-3for an overview of the maximum and minimum image area sizes by phone model. Most phone models support all sizes between the minimum and maximum. An exception is allowed for the Cisco Unified IP Phones 7940G/7960G due to resource constraints. For these phones, you should implement both the maximum size and minimum size windows ignoring all of the intermediate sizes.

Table 3-3	Application Status Window Allowable Image Sizes
		Maximum Image	Minimum Image	Maximum Image
Phone Models		Area Width	Area Width	Area Height
7940G, 7960G		106	21	21
7941G/7941G-GE, 7942G, 7945G, 7961G/7961G-GE,		252	50	50
7962G, 7965G
7970G/7971G-GE, 7975G, IP Communicator		262	50	50

	Cisco Unified IP Phone Services Application Development Notes
3-16	OL-20949-01