Cisco Systems 7920 appendix When this popup window appears, click OK

Page 36

20. When this popup window appears, click OK:

21. When this popup window appears, click OK:

22.Choose Menu > Phone Settings > USB Enable / Disable [Disable] to disable the Cisco 7920 USB port.

Note: The Cisco 7920 will not be able to authenticate or associate with the Cisco Aironet 1200 AP, nor will it be able to register with the Cisco CallManager server, until you complete the next two subtasks.

Page 35 Page 37
Image 36
Page 35 Page 37
Contents
Introduction Document IDPrerequisites RequirementsComponents Used Related ProductsConventions Background TheoryUsing Open Authentication and Static WEP Keys Network DiagramConfiguring the Cisco Choose Edit Settings Wizard Step−by−Step InstructionsPage Click the System Parameters tab Click the Network Security tab Click the Phone Settings tab Choose Connection Logout Select Cisco 7920 USB and click Stop When this popup window appears, click OK Configuring the Cisco Aironet 1200 AP TroubleshootingVerifying Choose Security Ssid ManagerPage Verifying Using Open Authentication, Static WEP Keys, and VLANs Choose Edit Settings Wizard Page Page When this popup window appears, click Yes Select Cisco 7920 USB and click Stop When this popup window appears, click OK Configuring the Cisco Aironet 1200 AP with a Vlan Step−by−Step Instructions for Configuring Vlan 1 defaultChoose Services Vlan Choose Security Encryption Manager Step−by−Step Instructions for Configuring VLAN2 Verifying Configuring 802.1Q Trunking on the Catalyst 2924 XL 2924XL# show interface fastethernet 2/1 switchport 2924XL# show interface fastethernet 2/3 switchport Configuring the Inter−VLAN Router Router# show vlanUsing Cisco Leap When this popup window appears, click Cancel Click the Network Security tab Select Connection Logout Select Cisco 7920 USB and click Stop When this popup window appears, click OK Configuring the Cisco Aironet 1200 AP for Leap Click Security Server Manager10.21.15.10 Do not check Open Authentication or Shared Authentication Configuring the Cisco Secure Server for Leap Click Submit + Restart Page Page Page Check the Log to CSV Passed Authentications report check box Check the Log to CSV Radius Accounting report check box Troubleshooting Guidelines Click the Passed Authentications active.csv fileCisco 7920 Exhibits Problems After Configuration Changes Cisco 7920 Error Message − Association Failed, No AP FoundCisco 7920 Error Message − No Service IP Config Failed Incorrect WEP KeysCisco 7920 Error Message − Registration Rejected Cisco 7920 Error Message − Connecting to CallManager 0−5IP Routing Problems Leap Authentication Fails Check for Radius Error Messages on the Cisco Secure ServerClick Failed Attempts Click Failed Attempts active.csvCheck for IP Configuration Problems Trunking Native Mode Vlan 1 defaultAppendix Configuring the Cisco 7920 with CallManager General Troubleshooting HintsRelated Information
Related manuals
Manual 5 pages 2.92 Kb Manual 16 pages 62.07 Kb Manual 48 pages 3.26 Kb
Top Page Image Contents