Cisco Systems 7920 Configuring the Cisco Secure Server for Leap, Step−by−Step Instructions

Page 40

Configuring the Cisco Secure Server for LEAP

This subtask guides you through a basic Cisco Secure ACS configuration. It will support LEAP on a Cisco 7920, for the user that you assigned to the Cisco 7920 in a previous section of this document. A complete explanation of this process is beyond the scope of this document. However, the online help provided with the Cisco Secure ACS is very comprehensive.

Step−by−Step Instructions

The instructions in this section guide you through the minimum steps that are required to configure LEAP authentication parameters on the Cisco Secure ACS.

1.Log in to the Cisco Secure ACS.

2.Click the Network Configuration button to navigate to the Network Configuration page.

You will see a page with these areas:

Page 39 Page 41
Image 40
Page 39 Page 41
Contents
Introduction Document IDPrerequisites RequirementsComponents Used Related ProductsConventions Background TheoryNetwork Diagram Using Open Authentication and Static WEP KeysConfiguring the Cisco Choose Edit Settings Wizard Step−by−Step InstructionsPage Click the System Parameters tab Click the Network Security tab Click the Phone Settings tab Choose Connection Logout Select Cisco 7920 USB and click Stop When this popup window appears, click OK Configuring the Cisco Aironet 1200 AP TroubleshootingVerifying Choose Security Ssid ManagerPage Verifying Using Open Authentication, Static WEP Keys, and VLANs Choose Edit Settings Wizard Page Page When this popup window appears, click Yes Select Cisco 7920 USB and click Stop When this popup window appears, click OK Step−by−Step Instructions for Configuring Vlan 1 default Configuring the Cisco Aironet 1200 AP with a VlanChoose Services Vlan Choose Security Encryption Manager Step−by−Step Instructions for Configuring VLAN2 Verifying Configuring 802.1Q Trunking on the Catalyst 2924 XL 2924XL# show interface fastethernet 2/1 switchport 2924XL# show interface fastethernet 2/3 switchport Configuring the Inter−VLAN Router Router# show vlanUsing Cisco Leap When this popup window appears, click Cancel Click the Network Security tab Select Connection Logout Select Cisco 7920 USB and click Stop When this popup window appears, click OK Configuring the Cisco Aironet 1200 AP for Leap Click Security Server Manager10.21.15.10 Do not check Open Authentication or Shared Authentication Configuring the Cisco Secure Server for Leap Click Submit + Restart Page Page Page Check the Log to CSV Passed Authentications report check box Check the Log to CSV Radius Accounting report check box Troubleshooting Guidelines Click the Passed Authentications active.csv fileCisco 7920 Exhibits Problems After Configuration Changes Cisco 7920 Error Message − Association Failed, No AP FoundCisco 7920 Error Message − No Service IP Config Failed Incorrect WEP KeysCisco 7920 Error Message − Connecting to CallManager 0−5 Cisco 7920 Error Message − Registration RejectedIP Routing Problems Leap Authentication Fails Check for Radius Error Messages on the Cisco Secure ServerClick Failed Attempts Click Failed Attempts active.csvCheck for IP Configuration Problems Trunking Native Mode Vlan 1 defaultAppendix Configuring the Cisco 7920 with CallManager General Troubleshooting HintsRelated Information
Related manuals
Manual 5 pages 2.92 Kb Manual 16 pages 62.07 Kb Manual 48 pages 3.26 Kb
Top Page Image Contents